CAT 40 3/8 x 3" 4PCS SET End Mill Tool Holder Balanced G2.5 20000 RPM CAT40





 
Fits on Haas, Fadal, Mazak, Mori Seiki, Kitamura, Hurco

Specification：
Type: CAT40
Material: 40CR
Bore Diameter: 3/8"
Projection Length: 3”
Max RPM Balanced To: G2.5 20000 RPM
TIR (Inch): 0.0001”
Drawbar Thread Size: 5/8"-11
Noes Diameter: 1"
Coolant Thru: Yes
Quantity: 4 pieces

Feature：
1、Tool holder is balanced to G2.5 20,000 RPM.  Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
2、Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole. And when the holder is placed into the Haimer balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
3、All critical surface are precision ground
4、Internal bore concentricity is less than 0.0001" from taper to end mill pocket
5、Flange and V-groove are precision ground to ensure reliable tool change
6、Coolant thru spindle capability

4 x CAT40 3/8 x 3" End Mill Tool Holder
CCCBD8316

We have other holders & collet chucks & pull stud available at my ebay store! Welcome to the store to watch!


 

 

Paypal, Visa, and MasterCard are the accepted forms of payment.
Please use the eBay checkout system when paying for your order.

Immediate payment is required for all orders.


 

 

We ship the next business day after payment has been verified(Except holidays).



 

 

We provide 30 days money back guarantee.

Item(s) would be shipped out within 1-3 working days after received your confirmed payment.

If you are not satisfied with our product, please return it to us in its original condition. Thanks for your cooperation.
Please email us before leaving any negative feedback or opening any dispute on the site, we will help you to solve the problem.
Just send us a message and we will reply you in 24 hours, because of the large amount of E-mail, so sometimes can not respond promptly. Please understand that.

We care about our valued customers and will always try to help you, and we hope we can cooperate again in the future.

This item does not include a paper manual. If you have any questions during installation, feel free to contact us anytime.

 

Fits on Haas, Fadal, Mazak, Mori Seiki, Kitamura, Hurco

Specification：
Type: CAT40
Material: 40CR
Bore Diameter: 3/8"
Projection Length: 3”
Max RPM Balanced To: G2.5 20000 RPM
TIR (Inch): 0.0001”
Drawbar Thread Size: 5/8"-11
Noes Diameter: 1"
Coolant Thru: Yes
Quantity: 4 pieces

Feature：
1、Tool holder is balanced to G2.5 20,000 RPM.  Balanced tool holder minimizes the centrifugal forces which minimize the stress on spindle bearing, minimize vibration and maximize the cutting tool's life cycle and greatly improve surface finish.
2、Unique design feature in the extension nose to minimize the off-balance nature of CAT 40 taper specification. On the side of flange where a half spherical hole is located, a flat is cut into the cylinder nose to compensate the weight of the metal chips lost from forming this spherical hole. And when the holder is placed into the Haimer balance machine, less holes would need to be drilled in the v groove of the flange to protect the rigidity of the tool holder. Evenly weight distribution will minimize centrifugal force in high speed spinning and thus maximize the holder's ability to hold the cutting tool concentric to spindle rotation.
3、All critical surface are precision ground
4、Internal bore concentricity is less than 0.0001" from taper to end mill pocket
5、Flange and V-groove are precision ground to ensure reliable tool change
6、Coolant thru spindle capability

4 x CAT40 3/8 x 3" End Mill Tool Holder
CCCBD8316

We have other holders & collet chucks & pull stud available at my ebay store! Welcome to the store to watch!

On Nov 25, 2025 at 20:03:18 PST, seller added the following information:

Datacaciques
ibay365