Important note for customers outside the EU!
Any import duties, taxes and fees that may apply
are not included in the item price or the Shipping costs included.
The buyer is responsible for this You are responsible for your own fees.




KV-DOBLO-3G

vehicle-specific
Color rear camera
to replace the original 3. Brake light on the edge of the roof

Important instructions:
1. Only for vehicles with wing doors
2. Depending on the roof structure and installed trailer hitch
vehicle, you can see the trailer hitch on the monitor
may not see it.


Suitable for the following vehicles:

  Type: Year of manufacture:
- Fiat Doblo 2           2010 -> 2019
- Opel Combo D 2011 -> 2018

The simplest solution to retrofit a rear view camera:
Without making any changes to the vehicle, such as this
Drilling mounting/fixing holes.

Just the 3. Replace the brake light on the edge of the roof.

The camera can be connected to all moniceivers, naviceivers and
Connect monitors that have a rear view camera
Input via cinch socket.

The small, inconspicuous wide-angle camera fits perfectly
of the vehicle optics and switches on when inserting the
reverse gear automatically.

Due to their very high sensitivity to light
the camera even in poor lighting conditions or in
Optimum rear visibility at night and that's it
perfect parking and reversing aid for your vehicle.

The large horizontal viewing angle of 185°
ensures an excellent overview of the processes
behind their vehicle.

Thanks to the high image resolution, the image quality is very sharp
and rich in detail.


Equipment:

- Image playback mirrored
- Auxiliary lines: switched on at the factory but can be switched off
- Image sensor: 1/3" CMOS PC3089
- Resolution 720x480 pixels
- Horizontal viewing angle: 146°
- Viewing angle diagonal: 185°
- Camera vertically adjustable
- Image format: NTSC
- 580 lines resolution
- IP68 waterproof
- Minimum illumination: 0.1 lux
- Operating voltage: 9-16 volts DC
- Power consumption: max. 150mA
- Operating temperature: -20° to 70°C
- Cable length: 11.5 meters
- E approval E9*10R06/00*22328*00
- CE approval EN 55022: 2010; EN 61000-3-2:2006+A1:
009+A2:2009; EN61000-3-3:2008; EN 55024:2010
- FCC approval ANSI C63.4-2003


Scope of delivery:

- New goods
- Camera pre-mounted on the brake light mount
- 11.5 meter connection cable to the monitor
- Invoice in your name with VAT shown.


 

Visit my eBay shop: acr-hof


If you have any questions about the product
If you have one, write us an eBay message
or use the phone number or
Email address below
“Legal information of the seller”
> "complete information"


You can reach us at the following times:

Tuesday - Friday 10 a.m. - 6 p.m
Saturdays 10 a.m. - 2 p.m



SET WITH
are not included in the item price or the Shipping costs included. The buyer is responsible for this You are responsible for your own fees. to replace the original 3. Brake light on the edge of the roof 2. Depending on the roof structure and installed trailer hitch vehicle, you can see the trailer hitch on the monitor The simplest solution to retrofit a rear view camera: Without making any changes to the vehicle, such as this Just the 3. Replace the brake light on the edge of the roof. The camera can be connected to all moniceivers, naviceivers and The small, inconspicuous wide-angle camera fits perfectly of the vehicle optics and switches on when inserting the Thanks to the high image resolution, the image quality is very sharp - Auxiliary lines: switched on at the factory but can be swi