1/2'' Quick Release Boat Fender Holder - Marine Stainless Steel Quick-Release Boat Fender Holder Mount Cleat Hook, Receiver Not Included

DESCRIPTION

 

One-hand Operation: One 1/2'' quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand. Simply click the button, drop the pin into the receiver and you’re ready to go. The cleat would attach the fender tightly to your boat. No worry about knot tying and excess rope again. Indispensable accessory on your boat.

 

Sturdy & Durable: The heavy-duty 1/2'' fender holder kit is made of high quality 316 stainless steel material to ensure the corrosion resistance and long lasting use. A great choice for both fresh and saltwater vessels.

 

Anti-Scratch Design: Hand-polished, passivated and soft-edged top, tip and tab. Protects your rope and the fender mount from wear and scratch. Keeps the pin above receiver to prevent scratching highly-polished mirror finish. Suitable for installing in hard-to-reach areas. A Fantastic addition to your boat.

 

Warm Tips: 1)The kit only includes fender holder. Receiver is not included. 2) Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole; 3) It's recommended for use on fiberglass hulls. 4) The 3/8 inch holder is used with the 3/8 inch receiver. 4) For your better installation experience, other tools are recommended for the installation process. Please kindly check the recommended installation tool and process in the product detail page.

 

100% Satisfied Guarantee : We aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 60 days, no questions asked money back guarantee with 12 months’ warranty.

 

Product Description

Installation Tips:
Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.
Be sure to check that there are no structural members, cables, etc. behind the drilled holes.
Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.
Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole

 

Installing the Receiver:
1.Clean inside and outside surfaces.
2.Screw install tool into the brass nut plate.
3.Remove protective film from adhesive tape.
4.Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.
5.Unscrew install tool.
6.Apply marine grade silicone to underside of receiver head.
7.Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.

 

Package Include

1 pcs 1/2'' Boat Fender Holder


We aims to provide the best service for our customer,
If you have any problem about your order, please feel free to contact us.



Payment

1. Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. We ship items to Your Ebay address.Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out.

Shiping

1. Item will be shipped out within 1-2 business day after clear payment received.
2. Please make sure shipping address on your Ebay account is correct & up-to-date.
3. All of our items are shipped from our warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.

Please read the shipment and payment detail carefully before you bid.

Return

1.   Return to us  within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2.  Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. 
3.  If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

Contact US

Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.
1/2'' Quick Release Boat Fender Holder - Marine Stainless Steel Quick-Release Boat Fender Holder Mount Cleat Hook, Receiver Not Included

Product Description

One-hand Operation: One 1/2'' quick-release button of the cleat allows you to quickly and effortlessly dock and undock with single hand. Simply click the button, drop the pin into the receiver and you’re ready to go. The cleat would attach the fender tightly to your boat. No worry about knot tying and excess rope again. Indispensable accessory on your boat.

 

Sturdy & Durable: The heavy-duty 1/2'' fender holder kit is made of high quality 316 stainless steel material to ensure the corrosion resistance and long lasting use. A great choice for both fresh and saltwater vessels.

 

Anti-Scratch Design: Hand-polished, passivated and soft-edged top, tip and tab. Protects your rope and the fender mount from wear and scratch. Keeps the pin above receiver to prevent scratching highly-polished mirror finish. Suitable for installing in hard-to-reach areas. A Fantastic addition to your boat.

 

Warm Tips: 1)The kit only includes fender holder. Receiver is not included. 2) Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole; 3) It's recommended for use on fiberglass hulls. 4) The 3/8 inch holder is used with the 3/8 inch receiver. 4) For your better installation experience, other tools are recommended for the installation process. Please kindly check the recommended installation tool and process in the product detail page.

 

100% Satisfied Guarantee: We aims to provide the best service for our customer, if you're not 100% satisfied with our item, simply return it for a full refund in 60 days, no questions asked money back guarantee with 12 months’ warranty.

 

Product Description

Installation Tips:
Before installing the receiver, please using the Locator Disk and mark dead center of the receiver with a pencil.
Be sure to check that there are no structural members, cables, etc. behind the drilled holes.
Always finish drilling from the outside. This will minimize the risk of damaging the gelcoat.
Hole diameter: ⌀ 1/2" Receiver = ⌀ 1" Hole; ⌀ 3/8" Receiver = ⌀ 3/4" Hole

 

Installing the Receiver:
1.Clean inside and outside surfaces.
2.Screw install tool into the brass nut plate.
3.Remove protective film from adhesive tape.
4.Pivot nut plate, insert in hole, pivot back and pull several times to adhere tape on back side of fiberglass.
5.Unscrew install tool.
6.Apply marine grade silicone to underside of receiver head.
7.Apply Loctite to receiver threads, screw into brass nut plate and tighten with Allen wrench.

 

Package Include

1 pcs 1/2'' Boat Fender Holder

 

We aims to provide the best service for our customer,

If you have any problem about your order, please feel free to contact us.



1. Payment methods accepted:  Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance.
2. We ship items to  Your Ebay address.Please make sure your Ebay address is correct before you pay, cause it cannot be changed once the order shipped out.

1. Item will be shipped out within 1-2 business day after clear payment received.
2. Please make sure shipping address on your Ebay account is correct & up-to-date.
3. All of our items are shipped from our warehouse.
4. Please feel free to contact us by email if you cannot get your order in time.

Please read the shipment and payment detail carefully before you bid.

1.   Return to us within 60 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2.  Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. 
3.  If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.

Please contact us via ebay using"Contact member". We will respond within 1 business day or less.Thank you for your understanding.
ibay365