• You can watch a VIDEO with a short description of how to use below!

HYDROFLAME CHROM allows you to completely simulate mirror chrome or with the addition of dyes to simulate gold, copper, brass, etc. without the use of expensive equipment, ease of use without special skills.

Short Instructions All parts (except glass, ceramics and faience – see separate instructions/Section 1.2) must be coated with primer and a glossy lacquer/clearcoat or enamel. 1. Apply a 2K acrylic primer. Once dry, sand smooth. 2. Apply a 2K acrylic clearcoat lacquer and allow it to dry fully. 3. Lightly flame-treat the lacquer surface. 4. Degrease with isopropyl alcohol (IPA). 5. Apply the chrome coating: 1 light coat (dry), then 1–2 further coats (dry between coats). 6. Lightly flame the chrome using only the tip of the flame until a mirror finish appears. Do not overheat. 7. Seal the finish: apply a 2K acrylic clearcoat lacquer.
For decorative use only.

Contains: Isopropyl alocohol, silver nitrate
Water-based lacquer

Consumption: 100 ml/1-1.5 m2





 -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

HYDROFLAME CHROME PLATING SHOR INSTRUCTION - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:

[isdntekvideo]

DIY CHROME MIRROR COVER - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:

[isdntekvideo]

CHROME MIRROR COVER - YouTube

Video will open in a new window
Using the eBay App? Paste link into a browser window:

[isdntekvideo]