AQUA-AUDIO ESW - True Bypass Module


The ESW True Bypass module is an easy way to add real true bypass to almost every commercial guitar pedal.
Since it's activated via a momentary switch, it can be activated using the original switch of the pedal such as:
BOSS, DOD, IBANEZ, MAXON - without the need of making any changes to the pedal's enclosure or drilling.
Since the  ESW True Bypass module uses a sealed relay, the life expectancy is much higher then a standard
3PDT switch.
It can also replace the existing 3PDT switch in a pedal - by replacing it with a momentary switch.

The ESW module has TWO LEDs outputs - and can indicate both states; pedal active or bypassed (usually, only
one is used, but the option is there). 

Since the ESW module is already populated with the LED resistor on board, all you need to do is connect the
LED directly to the module, no extra resistors are needed.

The ESW module designed to be in bypass mode at the absence of power, so even if you don't power the
pedal, or the power is lost, the signal will pass through.  

*** Please note: The color of the PCB can vary according to the production batch***

All AQUA-AUDIO products are hand build.


Specifications:
Operation Voltage: 8.5-12VDC, 9VDC nominal
Bypass: True bypass
Current draw: <20mA when active @9VDC
Mechanical Endurance: 10,000,000 Operations
Electrical Endurance: 100,000 Operations (NO Contact)
Contact resistance: 100mΩ max 


Dimensions:
Height: 8.5mm 
Length: 24mm
Width: 25mm


Shipping: Within 3 work days, registered mail via Israel post with tracking number.

Please note: We strongly support recycling, and do our best to use recycled packages
and packing materials in our shipments. If you wish otherwise, please drop us a note.

Manufacturer: AQUA-AUDIO