This decoder is only suitable for decoding LED lights below 35W, lights greater than 35W are not applicable.
This Item will help to solve follow problem,the helpful rate up to 90%（Not 100% can solve your car decoding problem, please Understanding）:
Bulb flashing or flicker;
Radio interference;
The light turn off automatically engine starts;
Error message caused by OBC (On-Board Computer)/ECU check. 

Feature
EMC anti-interference function
80% CANBUS decoding function
20% focus on filtering function

Product Details
Condition:100% Brand New
Type:H13/9008 Resistor Canbus
Total Resistor:50W 6Ω
Capacitance:16V 10000μF -40~105°
Operating Voltage：12V DC

Package Include
2x  H13/9008 canbus wiring harness adapters

How To Confirm whether can-bus is needed?
This item wasn't exist self-decoding/self-Canbus【anti-flashing/anti-warning】function and DRL【Daytime running light】 function!!!
-- After installing the LED bulbs, the Vehicle needs to be decoded in the following cases:
1, the headlight light is flashing, strobe or indefinitely flashing(Electrolytic capacitor decoding may worked).
2, the on-board computer(ECU) reports an error, the central control panel displays an error icon or displays bulbs burns out error message.(Resistance decoding may worked)
3，The bulbs does not work. What you can do is connect the bulbs to12V DC ,it can work normally(Resistance decoding may worked).
situation 1: use this case to judge whether it need to be decoded.
situation 2:use this case to judge whether is a reverse polarity plug(turn bulb's plug 180° to insert into headlamp and turn on to test)

Feasible Solution
1, install the decoder; the decoding rate of the decoder on the market is about 90%, can not completely decode all models, the turnover rate is larger.
2, install the resistor, you need professional installation.
3, using ODM to read the error information code of the ECU on-board computer, through programming means, correct the error information to achieve the decoding effect.

Notes
1. It will be generated large heat during working.Please fix the resistor outside of the headlight housing.
2. Please fix the decoder to other accessories outside the headlight assembly to avoid shaking!!!
3. This item may not solve all compatible issues,that is not the product fault, was caused by the difference of the vehicle systems.
4. If you find this item doesn't solve the problem, please contact us first,we will provide profectional suggestions.
5. Some vehicles(such as Dodge, Chrysler, Jeep, BMW, VW ,AUDI, BENZ, Volvo ...vehicles) may need a more powerful resistor to help solve the above problem.