Product Description
HDMI+DVI+VGA+Audio Controller Board for 21.5" 1920x1080 Screen LM215WF1-TLA1 M215HW01 V.0 V.1 V.9 with 4-Lamp CCFL Backlight
---The power adapter for the board is DC+12V 5.0A~8.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402313739186 |
---Programmer for upgrading the firmware of this controller board: https://www.ebay.com/itm/402265558558 |
| The LCD's connector is Wire to Board type, pin pitch 1.0mm, 30Pin. The backlight connecotr is CP0502SL090(Wire to Board type), pin pitch 3.5mm, total amount 4pcs. |
|||
| HM215WU1-300 | LM215WF1-TLA1 | LTM215HT02 | M215HW01 V.0 |
| LM215WF1-TLB1 | M215HW01 V.1 | ||
| LM215WF1-TLF1 | M215HW01 V.9 | ||
| LM215WF1-TLG1 | |||
| ---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +5V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at +12.0V . |
| Kind Note: |
| ---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
| Package includes: |
|
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable(FI-XB30SSRL-HF16, pin pitch 1.0mm, pin amount 30pins) ---1× 4-Lamp CCFL Inverter Board |