Complete Extended Title

ISC Surface Guard Tape [14 mil Heavy Duty Outdoor Grade] (Helicopter-OG-HD): 8 in. x 30 ft. (Transparent)

Product Highlights

• ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion, and abrasion. ISC's surface guard tape also protects against extreme temperatures, ultraviolet light, and automotive solvents.
• Helicopter-OG-HD Surface Guard Tape Features and Benefits include: Won't yellow over time. Exceptional paint protection. Protects against UV light, hot and cold temperatures, solvents Resists erosion, abrasion, tears and punctures. Made from polyurethane (not vinyl or PVC); stands up to abuse. Extremely rugged; must be cut with scissors or razor knife. Durable, easy-release liner.
• Doesn't require solvent or heat to activate
• Product Applications include: Body panels on race cars. Bicycle frames. Skis. Kayaks. Surfboards. Ground effects. Bumpers. Tailgates. Top fuel wings. Trailer walls. Rail protection on stand-up paddle boards (SUPs). Any painted or unpainted surface that is prone to weathering, chipping or scratching.
• Carrier/Backing: polyurethane film. Adhesive: acrylic. Release Liner: 92 lb. polycoated white paper. Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier) 4.7 mils (liner).
• Adhesion: 110 ounces per inch (to stainless steel test panel). Tensile Strength: 80 pounds per inch (longitudinal). Service/Operating Temperature: -40F to 275F. Application Temperature: 50F (minimum). Elongation: 500%. Core: 3-inch diameter.

ISC Helicopter-OG-HD Heavy Duty Surface Guard Tape is conformable and extremely strong 14-mil outdoor grade polyurethane tape. Also known as helicopter blade/leading edge wing tape, the thick film backing provides exceptional protection from tearing, punctures, erosion, and abrasion. ISC's surface guard tape also protects against extreme temperatures, ultraviolet light, and automotive solvents. The tape is clear (transparent) and comes on a white paper, 92-pound polycoated release liner.

Helicopter-OG-HD Surface Guard Tape Features and Benefits

• Won't yellow over time
• Exceptional paint protection
• Protects against UV light, hot and cold temperatures, solvents
• Resists erosion, abrasion, tears and punctures
• Made from polyurethane (not vinyl or PVC); stands up to abuse
• Extremely rugged; must be cut with scissors or razor knife
• Durable, easy-release liner
• Doesn't require solvent or heat to activate

Product Applications

• Body panels on race cars
• Bicycle frames
• Skis
• Kayaks
• Surfboards
• Ground effects
• Bumpers
• Tailgates
• Top fuel wings
• Trailer walls
• Spring car wings
• Roll cages
• Headlights
• Wheel wells
• Truck beds
• Toolboxes
• Hood and door edges
• Protects bar code labels in extreme conditions
• Rail protection on stand-up paddle boards (SUPs)
• Any painted or unpainted surface that is prone to weathering, chipping or scratching

Country of Origin: United States.

Application Instructions

1. PREP: For best results, apply at temperatures between 50F to 80F. The surface must be clean and free of dirt and/or wax prior to application. Use Sharp scissors to cut Surface Guard to size before removing the liner. Experiment with a small piece first.
2. APPLY: Remove the paper liner slowly as Surface Guard is applied. Squeegee into position very slowly. The more you take your time, the better.
3. PLEASE READ: Since a wide variety of surfaces exist, no guarantee is expressed or implied as to removability or damage to the surface.

Technical Information

- Core: 3 inch diameter
- Backing/Carrier: polyurethane film
- Adhesive: acrylic
- Release Liner: 92 lb. polycoated white paper
- Thickness: 19.2 mils (carrier, adhesive, liner) 14.5 mils (carrier, adhesive) 12 mils (carrier)
- Adhesion: 110 ounces per inch (to stainless steel test panel)
- Tensile Strength: 80 pounds per inch (longitudinal)
- Application Temperature: 50F (minimum)
- Service/Operating Temperature: -40F to 275F
- Elongation: 500 %