Product Description
HDMI+DVI+VGA+Audio Controller Board for 15.6" 1920x1080 LCD screen B156HW01 LP156WF1 N156HGE
---The power adapter for the board is DC+12V 3.0A~5.0A. ---12V DC Adapter(with 5.5x2.5 male connector. The plug of the power cord is American standard): https://www.ebay.com/itm/402243169332 |
---Programmer for upgrading the firmware of this controller board of LVDS LCD: https://www.ebay.com/itm/402265558558 |
The board can drive 15.6inch 1920x1080 LCD with LVDS signal: |
|||
| B156HAN01.0 | LP156WF4-SLB1 | N156HGE-L11 | |
| G156HAN02.1 | LP156WF4-SLB2 | N156HGE-L21 | |
| G156HAN02.3 | LP156WF4-SLB3 | N156HGE-LA1 | |
| G156HAN04.0 | LP156WF4-SLB4 | N156HGE-LG1 | |
| LP156WF4-SLB5 | N156HGE-LB1 | ||
| B156HW01 V0 | LP156WF4-SLB6 | ||
| B156HW01 V1 | LP156WF4-SLB7 | ||
| B156HW01 V2 | |||
| B156HW01 V3 | LP156WF1-TLA1 | ||
| B156HW01 V4 | LP156WF1-TLB1 | ||
| B156HW01 V5 | LP156WF1-TLB2 | ||
| B156HW01 V6 | LP156WF1-TLC1 | ||
| B156HW01 V7 | LP156WF1-TLC2 | ||
| LP156WF1-TLC3 | |||
| B156HW02 V0 | |||
| B156HW02 V1 | LTN156HT01-201 | ||
| B156HW02 V2 | |||
| B156HW02 V5 | |||
| B156HTN01.0 | |||
| B156HTN01.1 | |||
| B156HTN02.1 | |||
| B156HTN03.2 | |||
| ---The power for the board+LCD and the screen's voltage are 2 different parameters. ---Normally, the board works at DC+12V3.0A~8.0A. ---The screen's voltage only can be supplied by the board's jumper. Normally, there are 3 kinds of voltages for the LCD: +3.3V +5.0V +12.0V. The jumper has been set at +3.3V for this listing LCD. Please don't jump it again. Or else, LCD will be damaged at 5.0V/12.0V . |
| Kind Note: |
| ---The driver board can be worked with lots of lcd with different resolution after upgrading the firmware,such as: ......800 x480 ......800 x600 ......1024x768 ......1280x800 ......1280x1024 ......1366x768 ......1440x900 ......1600x900 ......1920x1080 ......1920x1200 ......up to 2048x1154@60Hz |
| Package includes: |
---1× HDMI VGA DVI LCD Controller Board M.NT68676 ---1× Keyboard with Wire ---1× LVDS Cable |