EVO-ALL module & T-Harness combo for select Mazda and Toyota vehicles 2013 and up. The EVO-MAZT1 and EVO-MAZT4 are the ultimate Factory Fit, ALL-IN-ONE data immobilizer bypass, door lock, alarm & remote start interface with T-Harness combo module for select vehicles. It raises the standard of hassle-free installation convenience to a whole new level. It uses a multiple bus architecture with ten separate communication ports that provide complete functionality on every supported vehicle.

Product Features

• 3 x On-board LEDs for simplified programming and diagnostics.
• 1 x Factory Fit T-Harness for an easy install.
• 1 x 2-way datalink port for data-to-data (RS-232) communication with compatible remote-starters and security-systems. [2]
• 1 x 20 Pin general purpose plug for wire-to-wire connections with non-datalink equipped remote-starters and security-systems.
• The self-Learning algorithm automatically detects the vehicle during programming and adjusts accordingly.

Product Specifications

• 3 x CAN-Bus controllers.
• 3 x General purpose controllers (J1850, Class 2, encrypted key etc.).
• 1 x On-board relay (SPDT).
• 1 x On-board relay (DPDT).
• 1 x Analog controller 0-12VDC @ 20mV steps (Pass-lock, MUX).

Parts Included

• 1 x EVO-ALL control module. [1][3]
• 1 x Warning label. [3]
• 1 x 4 Pin 2-way data-link harness. [2]
• 1 x Factory Fit T-Harness (THAR-MAZT1, THAR-MAZT4). [4]

Legend

[1] A firmware update is required.
[2] Using the 2-way data-link port with an equipped remote-starter, security-system or RF-KIT greatly simplifies installation.
[3] Updated firmware and installation guides are posted on a regular basis. We recommend that you update this module to the latest firmware and download the latest installation guide(s) prior to the installation of this product.
[4] Secure Clip Harness.
[5] Refer to the vehicle compatibility page. Some vehicles may still require a key for remote starter installation.

For some models, a Key is Required. TRANSPONDER BYPASS BY WRAPPING OF FACTORY KEY.