LCI-90R Line Control Instrument (NEW) (Measurement Technology NW)

NSN:  6110 01 494 0225

Location: E4

The UL and CE approved LCI-90R is designed to directly interface with either a LCI-100 or LCI-90 local unit. Up to 32 remote LCI-90R displays can be linked together with a single local unit to form a shipwide winch monitoring network.

Tension, payout, and line speed are displayed on a bright 320x240 electroluminescent display for unmatched readability in all light conditions. Serial networking capability (via the local unit) allows the operator to configure parameter position, scale, and unitson all remote LCI-90R displays in the network.

As with our full-featured LCI-100 and LCI-90 instruments, these displays flush panel mounted (standard application), or bracket mounted when ordered with an optional watertight stainless steel rear enclosure.

General SpecificationsInstrument Specifications
Power16 W @ 85-250 VAC (LCI-100)
3.8 Amp @ 18-36 VDC (LCI-90)
Other input voltages available		Analog Input4 or 6 channels
Enclosure SizeH 5.7" x W 7.6" x D 5.0" (LCI-90)
H 8.0" x W 10.0" x D 5.5" (LCI-100)		Count InputQuadrature encoder, 5, 12-24 VDC
Inductive proximity, Half Effect
10 kHz Bandwidth
Operating Temperature-40°C to 75°C standardDigitial I/O4 or 8 Channels
Opto modules
DC output and dry contact
EnvironmentalSealed, Waterproof front panelSerial CommunicationsRS-485 (Optional), isolated, 2 wire
RS-232 (Optional), 1 channel, non-isolated

 320 x 240 El (electroluminescent


Five Brightness Levels and a Full 360 degree Viewing Range


Fully Sealed Stainless Steel Front Panel with Available Watertight Rear Enclosure


Remotely Monitor Line Spead, Payout, and Tension


Serial Interface with Local LCI-100 or LCI-90 unit(s)


Up to 32 LCI-90  Remotes


 Displays Can be Linked to a Single LCI-100 or LCI-90 Local Unit


UL and CE Rated, RoHS Exempt