Envistia Mall

Electronics for IoT, Prototyping & DIY

  • ALL ITEMS
    ·
  • MICROCONTROLLERS
    ·
  • POWER
    ·
  • MOTOR CONTROL
    ·
  • SENSORS
    ·
  • AUDIO
    ·
  • COMPONENTS

PAM8302A Miniature 2.5W Class D Mono Audio Power Amplifier Module Board

  •  - Picture 1 of 4
  •  - Picture 2 of 4
  •  - Picture 3 of 4
  •  - Picture 4 of 4
 

PAM8302A Miniature 2.5W Class D Mono Audio Power Amplifier Module Board

This miniature mono audio amplifier is surprisingly powerful - able to deliver up to 2.5 Watts into 4 Ohm impedance speakers, all in the form factor about the size of a US postage stamp. The module features a class D audio amplifier controller IC, able to operate from 2.0V-5.5V DC input. Since the amp is class D operation, its very efficient (over 90% efficient when driving an 8Ω speaker at over 1/2 Watt), making it perfect for portable and battery-powered DIY projects. 

The module has 24dB gain, with a trim pot to adjust the volume on the board down from 24dB.

The A+ and A- audio inputs of the amplifier go through 1.0uF capacitors, so they are fully 'differential'. If your audio source does not have differential outputs, simply tie the "Audio -" pin to ground.

The output is "Bridge Tied", meaning that the output pins connect directly to the speaker connections with no connection to ground. The left and right channel "negative" connections should not be connected together, and the amplifier's output should not be connected to another amplifier, it should drive the speakers directly.

Specifications:
Size: 24mm x 16mm (0.95 x 0.63 inches) 
PSRR (power supply ripple rejection): 50dB at 1KHz
Filterless design
Fixed 24dB gain, onboard trim potentiometer for adjusting input volume
Thermal and short-circuit/over-current protection
Low current draw: 4mA quiescent and 1uA in shutdown mode
Shutdown pin (SD) can be connected to ground to mute the amplifier's output
Output Power: 2.5W at 4Ω, 10% THD, 1.5W at 8Ω, 10% THD, with 5.5V supply
Input Voltage Vin: 2.0V - 5.5V DC, 5.0V recommended
Speaker Load: 4-8 Ohms

Package Includes:
1 x PAM8302A 2.5W Class D Mono Audio Power Amplifier Module
Header pins
Link to online specifications and usage instructions

Get it faster! Stocks and ships from our US Colorado office for quick delivery.

Contact us for quantity/OEM discounts.
 
We provide USPS First Class Shipping - Not Economy Shipping

Featured Products

5pcs PAM8403 Mini 2 Channel Stereo 3W Class D Audio Power Amplifier Module Board

$6.79

2pcs PAM8403 Mini 2 Channel Stereo 3W Class D Audio Power Amplifier Module Board

$5.29

PAM8403 3W Stereo Audio Power Amplifier Board Module with Volume Control Pot US

$5.69

5pcs TP4056 DW01A 5V 1A Micro USB 18650 Lithium Battery Charger Board Module

$7.49

2pcs 5V Micro USB Input 1A 18650 Lithium Battery TP4056 DW01A Charger Module

$5.69

5V 1A Micro USB TP4056 DW01A 18650 Lithium Battery Charging Board Charger Module

$5.39

PAM8403 Mini 2 Channel 3W Stereo Class D Audio Power Amplifier Module Board USA

$5.19

MP3 USB Flash Drive Micro SD TF Card Player Decoding Amplifier Board Module

$5.89
Add suggested items to your listings - Check it out on 3Dsellers.com

· All Rights Reserved to My Store · 

eBay listing template by 3Dsellers.com - Try for Free!