SPINDLE 5/8" ARBOR HOLE

FOR MOTOR - GRINDER  

1/2" SHAFT LEFT HAND THREAD

Spindle is manufactured with close tolerances, runs true without any vibration with optimal performance of wheels and accessories being used.

This Arbor - Spindle is used to hold Wheels with 1/2" arbor holes: Abrasives, Drum Sanders, De-Burring, Buffs and Felt Wheels and more. Arbor hole on this Spindle is a 5/8" to work on 5/8" diameter shaft Grinders, Motors or Polishers.

Precision Quality Machining is done by CNC Equipment · Made of Steel and Anodized Black Finish · Set of Allen Screw do not protrude above the main shaft of the spindle. Spindle comes with 2 Steel Machined Washers

The arbor is made with threading to be used on the LEFT Side of the motor, fastened and held on the motor shaft with 2 Allen Head Set Screws.

Note: Always slightly tighten the front most set screw and then the one closest to the motor. Final tightness should be done after both are equally tight.

SPECIFICATIONS: JETS Product # 1603-853475

- Material: Cold Rolled Steel

- Overall Length: 3-7/16" - 87.3mm

- Arbor Body Diameter: 1" - 25.3mm

- Spindle Body Length: 1-9/16" - 39.7mm

- Spindle Shaft Length: 1-7/8" - 47.65mm

- Arbor Hole: 5/8" - 15.87mm for Shaft Connection

- Spindle Shaft Diameter: 1/2" - 12.7mm

- Weight: 7.3oz. - 207gr

>>> Spindle is made to be used on a 5/8" shaft diameter and on the LEFT Hand Side of Motor with forward direction.