DIALUX^® Brand polishing compounds originally formulated in France has been a popular polishing compound for over 50 years.  

Dialux^® polishing compounds are a high grade premium polishing line of buffing compounds specifically formulated for JEWELERY and Precious Metals.

JETS PRODUCT # 1614-904080

We use the terminology "Rouge" (French meaning for Rouge is Red), as it has become the popular word used to describe many of the Jewelry Polishing compounds.

Black Dialux^® French originated polishing compound is especially formulated for Silver and White Metals and Metal Alloys.  The Dialux polishing compounds are a high grade premium polishing line of compounds specifically formulated for Precious Metals in Jewelry Polishing, use as a final polish the Very Best for that super finish.Dialux Noir works with Silver, White Metals. We use the terminology "Rouge" (French meaning Red) as it has become the popular word used to describe many of the Jewelry Polishing compounds. Black Dialux^® JETS Product # 1614-980   

NOTE: We have included polishing recommendations at the bottom of this page, to assist you.

Utilizes Graded Abrasives - Blended with Additives - Long Lasting Composition with Minimum Usage - Good Adhesion to Buffing Wheels

Gray-Gris - Pre-Polish Surface Conditioner  -   Black-Noir  -  High Luster

SHIPPING: Via First-Class Mail^® Package

NOTE: Visit  JETSINC  ebay store Listings, where you can see the COMPLETE and full variety of Dialux^® Jewelry Polishing Compounds, Buffing and Polishing Wheels and more Jewelers Equipments Tools & Supplies.   JETS Inc.

POLISHING RECOMMENDATIONS:

Our recommendations and suggestions on Buffing to obtain the best results possible: 

· Use the right compound for the metal that you are trying to polish 

· It may be needed to go through 2 or 3 steps, in polishing to get the optimum result you are looking to achieve.  

· Make sure that the parts that are being polished are smooth and clean, use the appropriate abrasive to remove  lines and scratches.

· Avoid using different compounds with the same buff, if you have to then make sure to clean and remove any hardened compound residue on the surface edge with a buff rake. 

· Segregate your buffs for the various metals, Gold, Silver, Brass … try not to use the same buff for all metals.  If you have to then make sure buffs are cleaned (dressed) with a buff rake.  

· A clean buffing wheel edge is important.

· Allow the buff and compound to perform the work they were made and formulated for, excessive force or pressure will hurt the process.      

· Whenever you are working with Platinum never use a buff that was used for another type of metal.

  WORK SAFE!   Working with rotary motors and wheels can be dangerous if proper safety procedures are not followed. 

PROTECTION - Protect yourself, your fingers and hands, your face and eyes and use respirators.