220V Hammer Type Construction Waste Crusher

The hammer crusher is a device that uses a high-speed rotating hammer head to impact on and crush materials. It is widely used in the industries of mining, building materials, chemical engineering and so on, and can perform medium and fine crushing operations on various materials such as ore, coal and limestone. The hammer crusher has the advantages of being compact in structure, high in crushing ratio, high in production efficiency, easy and convenient to operate and so on.

• 1. Operation safety
• Operators must undergo professional training, be familiar with the structure, performance and operation methods of the equipment, and strictly follow the requirements of the manual to operate the equipment.
• During the operation of the equipment, it is strictly prohibited to insert hands or other parts of the body into the hazardous areas such as the feeding inlet and the machine shell, and it is strictly prohibited to open the machine shell for any operation.
• When the equipment is running, the operator should pay close attention to the operation condition of the equipment. If any abnormalities are found, the operator should stop the machine immediately and handle the problem, and the machine must not operate with problems.
• 2. Electrical safety
• The electrical system of the equipment must be installed, repaired and maintained by professional electricians, and non-professional workers are not allowed to operate the equipment without authorization.
• Regularly inspect the electrical circuits to avoid the electric leakage, short circuits and other accidents caused by circuit aging or damage.
• The equipment should be reliably grounded to ensure the electrical safety.
• 3. Other safety
• When the device moves, the power supply should be disconnected, operation should be conducted by professionals to avoid accidents such as collisions and falling.
• Safety warning signs should be set up around the equipment to prevent unrelated personnel from approaching, and especially when the equipment operates, persons are strictly prohibited from staying near the equipment.

• High crushing efficiency: The 9-hammer rotor delivers dense impact for high crushing efficiency and uniform output, and the hammers can be replaced individually.
• Effective Screening: The standard 15mm screen ensures the controllable output size, the crushed materials can be directly utilized, and the continuous operation can be well achieved.
• Easy movement: The machine is equipped with movable wheels, making it easy to move by one person, suitable for narrow working spaces.
• Independent control: The separate electric control box is fitted with start/stop and emergency stop buttons, achieving simple operation and improving the operation safety.
• Easy maintenance: The quick-open protective cover is designed for convenient screen and hammer replacement, ensuring easy maintenance.
• Multi-purpose application: The machine is suitable for crushing bricks, concrete blocks, tiles and other brittle construction waste, and on-site recycling cuts the waste transportation costs.

1. Power on: Connect the power cord to the air switch, turn on the power switch of the control box and check if the control box indicator light is displaying normally.
2. No-load trial operation: Press the green start button on the control box to start the equipment and conduct no-load operation. Observe whether the equipment runs smoothly, and whether there are any abnormal sounds, vibrations and other situations. If there are any abnormal situations, immediately press the red stop button, and stop the machine for inspection and troubleshooting. The no-load operating time is generally 3-5 minutes.
3. Material feeding and crushing: After the no-load trial operation is normal, slowly and evenly feed the materials into the feeding inlet. The feeding speed should be matched with the production capacity of the equipment to avoid the phenomena that due to the too fast feeding, the equipment is overloaded, the crushing effect is affected, and even the equipment is damaged.
4. Adjustment of the discharged particle size: If the discharged particle size needs to be adjusted, the screen plates with different pore diameters can be replaced in the equipment stop state. The screen mesh of the machine is 15mm. Before the screen plate is replaced, the power supply should be turned off, the equipment completely stops, and then the replacement operation can be conducted to ensure the safety.
5. Machine stop operation: After completing the crushing operation, stop feeding the materials. After the materials in the machine shell are basically crushed and discharged, press the red stop button to stop the equipment. Then turn off the power switch of the control box.

1 x Hammer Type Construction Waste Crusher 220V

Default Shipping Cost or Free Shipping Information:
▲ Default shipping cost or free shipping service is only for the lower 48 United States by UPS Ground or USPS. Other areas or needs other shipping ways, please contact us.
▲ Buyers from Guam, Puerto Rico, Virgin Islands, American Samoa, Alaska, Hawaii, PO Boxes, APO/FPO addresses or other countries/areas, there WILL be extra shipping costs, please contact us for more detailed information.
▲ Please make sure your address is valid for both UPS and USPS services. Any costs incurred because of incorrect or undeliverable address should be undertaken by buyer.

Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends & public holidays.

Sales tax / Customs duties: Any sales taxes or Customs duties are not included. If came out, they must be undertaken by the buyer.

Damage In Shipping: Email or call us First! We will work with you to get the case resolved in the fastest method.

If you are not 100% happy with your purchase, please contact Us. Please don't directly opened a request or case without informing us, or else, we will do some discounts on the warranty and other sales-services later on. Hope for your understanding.

Returns & Exchanges

▲ All returns must be made within 30 days of delivery date. Items must be in new, unused condition, with all original materials included with the shipment. A partial refund may be applied for opened or damaged items, depending on the condition.
▲ Items returned under the buyer’s remorse: The return shipping fee must be covered by the buyer; The original shipping cost will also be deducted from the refund. 15% restocking fee of the items purchase price will be charged.
▲ Returns that are the result of our seller's error: Buyer will receive a full refund of the item as well as shipping charges
▲ All returns require a RA (Return Authorization) number that will be given by our seller. Please contact with us at first for more details.

Defective & Damaged Products
▲ If product was received damaged or not as described, please send us some pictures or videos, so we could well understand your problem, then solve them for you ASAP. Besides, it's much helpful for us to claim with UPS, remind our related department to pay much more attention to packaging later on. Hope for your understanding.
▲ Replacement or refund of defective or damaged products can only be returned in exchange for the exact same product, or else, the purchase price will be refunded back to your original payment method.
▲ If an item is received damaged, customer service must be contacted within 7 days of receiving your item. All returns require a RA (Return Authorization) number as above.

▲ 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.
▲ Any warranty shipping cost to us is responsible by buyer.
▲ Any shipping cost to buyer is responsible by the seller.
▲ We committee to the customer satisfaction and want to bring you the best purchase experience. If there is any problems, please contact us ASAP. If not, please leave us a positive feedback as it's very important for us. Thanks very much.