The FP 2400Q is a lightweight and space-saving four-channel power amplifier, ideal for use in high quality touring sound systems as well as in demanding permanent installations. The fP 2400Q is suited to a diversity of applications, including multi-channel monitor systems, four-channel reproduction, and compact amplification in active 2-, 3-, and 4-way systems such as line arrays.

Specifications
General
Number of input channels: 4
Number of output channels: 4
Peak output voltage: 81 V
8 ohms load: 54 Vrms
Max output power all channels driven
8 ohms 1: 380 W
4 ohms 2: 90 W
4 ohms 3: 700 W
2 ohms 1: 500 W
Max output power bridged
8 ohms 4: 760 W
4 ohms 4: 1020 W
4 ohms 5: 1280 W
Performance
THD + N 20 Hz - 20 kHz for 1 W: 0.07 %
THD + N at 1 kHz and 1 dB below clipping: 0.02 %
DIM 30 at 3 dB below clipping: 0.06 %
Hum and noise: < -107 dB
Channel separation at 10 kHz: 70 dB
Slew rate: 60 V/μsec
Common mode rejection: 50 dB
Connectors and Buttons
Gain selectable [dB] 5) 6: 32
Gain controls: 31 pos detent
Clip: Red LED
Output headroom indicators: 5 green LED’s
Back panel user interface
Inputs: Neutrik Combo
Clip limiters: On/Off, each ch.
MLS switch [dB]: 0, -3
corresponding to [Vrms]: 55, 41
when bridged [Vrms]: 110, 82
Link switch: Ch. A-B, B-C, C-D
Power
Operating voltage: 130-265V/65-135V
Soft start / Inrush power: Yes / max. 5 A
Full output power at 4 ohms, 230V/115V: 180-265V/90-130V
Minimum start-up voltage, 230V/115V: 175V/95V
230 V or 115 V versions: Yes
Current draw at 4 ohms and 230V/115V
Idle, no load at output: 1.0/2.0 Arms
1/8 of full power (-9 dB): 6/12 Arms
1/3 of full power (-5 dB): 9/18 Arms
Dimensions
Dimensions: W: 483 mm (19”), H:88 mm (2 U), D: 316 mm (12.4