• OE-level ALL System Diagnostics
• Bidirectional Control/Active Tests
• ECU Coding
• AUTO VIN Scan
• 10+Special Functions
• FULL OBD2 Function
• 10.1" Tablet
• VCI box Upgrade, more stable connection, fast diagnose.
• WiFi and Bluetooth Support
• 99% Car Makes
• Provides Remote Support
• Long time working battery
• 2 Years Free Update via Wifi

Ancel X7 10.1-inch tablet obd2 scanner is capable of reading and clearing trouble codes of all major systems , including Engine, Airbag/SRS, Transmission, ABS, SAS, Air Conditioning, ACC, Audio, Headlight ,Center Lock, ESP,Suspension failures, ect.

To diagnose Brake System if you feel the brake pedal is mushy and notice unusual odor or noise, etc. A properly operating brake system is critical to ensure safe vehicle control and operation;

To diagnose Emission System if the system is affected by vehicle age or poor quality fuel. A good emission system reduces harmful gases to a large degree and protects you from being fined;

To diagnose Fuel system if vehicle won’t start or “Check Engine” light is illuminated. Check car’s fuel system regularly ensures the best performance of your car with the lowest emissions;

To diagnose Transmission if your car is slipping or difficult to shift. The system plays an important part in the overall performance of your car;

To diagnose Wiper System if you observe chattering or streaking wiper. If the car is not regularly checked, the accident might happen because you can’t see clearly;

To diagnose Light System if you see rapid signal blinking or dimming lights.

And many more ...

The Coding function is used to re-flash the vehicle control modules. Automotive diagnostic tool allows you to reprogram adaptive data for certain components after making repairs or replacements, providing ways for the issues of Drivability, Fuel Efficiency, Power Loss, Fault Codes, Durability of Mechanical Parts.

Bi-directional & Active Test:

This ANCEL X7 bidirectional scan tool request information or command a module to perform specific tests and functions. For instance, in the case of OBD II generic information Mode 1, you can initiate a request for information from the power-train control module, and the PCM responds by sending the information back to the scan tool for display. In addition, X7 scanner have the ability to actuate relays, injectors, coils, or perform system tests, etc.

With extensive bidirectional actuate solenoids value and actuators, X7 bidirectional scanner checks all modules in seconds

the supported control modules are but not limited to:

Operate Mirror
Open/Close the Sunroof
Test Door Lock
Turn on the radiator fan
Sound horn
Test door lock actuators
Turn on interior & exterior lights
more...
Compatibility will differ from specific year and vehicle. Please check compatibility if necessary.

Ancel X7 support 10 Special Functions:

1.Oil Reset Service:
Allows you to perform reset for the Engine Oil Life system, which calculates an optimal oil life change interval depend on the vehicle driving conditions and climate.

2.EPB Service:
Helps maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assisting with brake fluid control, opening and closing brake pads, and setting brakes after disc or pad replacement, etc.

3.ABS Bleeding
ABS brake bleeding to get a firm brake pad after air exhaustion.

4.BMS service
Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

5.TPMS service
Makes sense in displaying sensor IDs from the vehicle's ECU, inputting TPMS sensor replacement IDs and testing sensors.

6.DPF Service
Allows you to carry out numerous functions to the Diesel Particulate Filter system.
TPMS Service: Allows you to quickly look up the tire sensor IDs from the vehicle’s ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.

8.SAS steering angle sensor service
helps clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.

9.Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Otherproblems with the ignition system and mechanical components also may not show an rpm loss when an injector is turned off

10.TPS Throttle Adaptation
The throttle body is a tube containing a pivoting flat(butterfly) that is used to control the amount of air entering an engine. In an electronically fuel injected car , a throttle position sensor and air flow sensor communicate with the computer , which supplies the corresponding amount of fuel needed at the injectors. It must need re-learning throttle sensor position after clearing or repair

ANCEL X7 OBD2 Scanner basic functions:

English, French, German, Spanish, Russian, Italian, Portuguese, Polish, Dutch, Japanese, Korean, Swedish, Czech, Turkish

How to Switch Language?

1.Click"Setting" and find "Language",Change the language you want.
2.Click"Upgrade"button,enter into serial number and password
3.Select car Brand and download all
4.When all car brands download,it finished.

How to connect X7 and use it to Diagnose?

1.Connect with home wifi and run Ancel X7 software.
2.Input serial number to active the account.
3.Choose a languge,and then download software.
4.Connect cabal with x7 VCI,then plug OBD connector to car OBD port,VCi box will turn red.
5.Find"X11xxxxxxx" on bluetooth-compatible,clict connect,the light will turn blue.
6.Start diagnostic.

HOW to feedback?

The feedback function of ANCLE x7 will provide you with the best after-sales service. If you have any problems that can’t be solved by yourself, please follow the steps to provide feedback and contact customer service. After-sales service upgrades will make your purchase more secure

1.Click "Feedback" button when test you car model fail
2.Write down the vehicle information,complain and picture according to the requirements of the device page.
3.Click "UpIoad" button ,Then contact the store customer service and leave the VIN.