ANCEL JC400 Auto Car Ultrasonic Fuel Injector Cleaner Tester Leak Test Machine
New Upgrade ANCEL JC400 Automotive Ultrasonic Fuel Injector Cleaner Tester for PFI GDI Piezo Injector 0-20Bar Pressure Injector Nozzle Cleaning Machine All Type Injector
● Digital Display Screen
● Ultrasonic Cleaning
● Injector Spray Testing
● Seal Testing
● Variable Speed Testing
● Pressure Return Testing
● Automatic Pressure Relief
● Ultrasonic Cleaning
● Injector Spray Testing
● Seal Testing
● Variable Speed Testing
● Pressure Return Testing
● Automatic Pressure Relief
📯Product Features:
This fuel injector test unit is designed to test various types of modern automotive fuel injectors, including the latest GDI injectors. It stands out from similar products thanks to a series of innovative technological designs.
1.Equipped with an LCD control panel, all operation configurations can be completed in a single display area.
2.Built-in high-precision digital pressure sensor, paired with a closed-loop pressure control circuit.
3.Features unique air lock pressure balancing and stabilization technology.
4.It incorporates an innovative piston fuel pump, enabling the use of a wider range of test fluids.
5.It uses a 50mm diameter corrosion-resistant borosilicate tube, enhancing the observation of injection performance during testing.
6.It supports an adjustable backlight function.
7.It enables zero-pressure connection and disconnection of the injector.
This fuel injector test unit is designed to test various types of modern automotive fuel injectors, including the latest GDI injectors. It stands out from similar products thanks to a series of innovative technological designs.
1.Equipped with an LCD control panel, all operation configurations can be completed in a single display area.
2.Built-in high-precision digital pressure sensor, paired with a closed-loop pressure control circuit.
3.Features unique air lock pressure balancing and stabilization technology.
4.It incorporates an innovative piston fuel pump, enabling the use of a wider range of test fluids.
5.It uses a 50mm diameter corrosion-resistant borosilicate tube, enhancing the observation of injection performance during testing.
6.It supports an adjustable backlight function.
7.It enables zero-pressure connection and disconnection of the injector.
📯Universal voltage compatibility worldwide, supports piezoelectric injectors, and covers nearly all injector types.
📌 Working Voltage: AC90-240V 50/60HZ
📌 Power: Max 150W
📌 Ambient Temperature: -5℃~+50℃
📌 Fuel Tank Capacity: Maximum 1500ML
📌 Output Signal: Low PFI / High PFI / GDI
📌 Size and Weight: 27x31x35CM 11.75KG
📌 Pulse Width: 4000-9900 Microseconds
📌 Ultrasonic: Maximum 60W, Frequency 28KHZ-46KHZ
📌 Pressure: 1-20bar
📌 Color: Black Orange
📌 Power: Max 150W
📌 Ambient Temperature: -5℃~+50℃
📌 Fuel Tank Capacity: Maximum 1500ML
📌 Output Signal: Low PFI / High PFI / GDI
📌 Size and Weight: 27x31x35CM 11.75KG
📌 Pulse Width: 4000-9900 Microseconds
📌 Ultrasonic: Maximum 60W, Frequency 28KHZ-46KHZ
📌 Pressure: 1-20bar
📌 Color: Black Orange
📯Which cleaning solution should I use?
📌 Ultrasonic Bath:
It's recommended touse ready-to-use bottled ultrasonic fluid,or specialized ultrasonic cleaning
powder.
Should the above not be available,a mixture of water and the following items could beused as an alternative
💹Degreaser
💹Kitchenwarecleanser
💹SodiumBicarbonate
📌 Injector Test Fluid:
Werecommend theuseofready-to-usebottledtestfluid.
Should such fluid not be available,the following items could be used as an alternative
💹Kerosene/Paraffin
💹Diesel
📌 Never use ethyl alcohol or gasoline as test fluid,since they are highly flammable!
📌 Ultrasonic Bath:
It's recommended touse ready-to-use bottled ultrasonic fluid,or specialized ultrasonic cleaning
powder.
Should the above not be available,a mixture of water and the following items could beused as an alternative
💹Degreaser
💹Kitchenwarecleanser
💹SodiumBicarbonate
📌 Injector Test Fluid:
Werecommend theuseofready-to-usebottledtestfluid.
Should such fluid not be available,the following items could be used as an alternative
💹Kerosene/Paraffin
💹Diesel
📌 Never use ethyl alcohol or gasoline as test fluid,since they are highly flammable!
📯How should I use ANCEL JC400?
1.Power Socket
The injector test bench is compatible with a wide input range from 90V to 240V AC 50/60Hz.
2.Test Fluid Level Gauge & Drain Hose
The Injector test bench comes with 1.5L fluid tank. Note the fluid level when refilling. Make sure that the fluid level does not exceed the max line. Remove the hose to drain the test fluid, as needed. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
3.Ultrasonic Fluid Drain Hose
Remove the hose to drain the test fluid, as necessary. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
4.Control Panel
Please refer to the Control Panel section for detailed operating instructions.
5.Signal Output
From left to right, the signal indexes are #1 to #4, on which the signal cords shall be mounted.
6- Cylinder Seal Switch
Lift up the cylinder seal switch to seal the cylinders, and pull it down to release, so that the cylinders can be drained as needed.
7- Locking Nut
For locking the fuel distributor. To remove, move the locking nut 1cm higher so that the fuel distributor can be taken off.
8.Test Fluid Delivery Hose
This hose extends from the piston fuel pump, to supply test fluid to the fuel distributor. This must be mounted before starting to use the test bench. Once mounted, it is not necessary to take it off.
9.Pressure Balancing & Stabilizing Hose
This hose leads to the air-lock pressure balancing & stabilizing assembly. It is designed to push air out of the fuel distributor to ensure no air remains in the distributor.
10.Fuel Distributor
The fuel distributor has an inbuilt Φ13 fitting. Injectors of this size can be mounted to the distributor directly, while other injectors will need to use adapters. Please refer to the Accessories section for adapter details.
11 - Ultrasonic Bath
The Ultrasonic Bath must not be activated unless there is fluid in the bath, filled to the minimum level. To activate the ultrasonic bath, at least one injector must be connected to the signal cord, or else this may cause an error. Put injectors into the basket, then put the basket into the ultrasonic bath. Otherwise, there is a risk that the shock created by the activated injectors may damage the ultrasonic bath. Drain and clean the Ultrasonic Bath after use.
12.Fuel Distributor Mounting Ports
There are two sets of mounting ports for the fuel distributor. The set in the middle is for regular injectors, the other set are for injectors where the feed port and nozzle are not vertically centered, e.g. Siemens Piezo.
1.Power Socket
The injector test bench is compatible with a wide input range from 90V to 240V AC 50/60Hz.
2.Test Fluid Level Gauge & Drain Hose
The Injector test bench comes with 1.5L fluid tank. Note the fluid level when refilling. Make sure that the fluid level does not exceed the max line. Remove the hose to drain the test fluid, as needed. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
3.Ultrasonic Fluid Drain Hose
Remove the hose to drain the test fluid, as necessary. When unboxing the injector test bench, the rack that fixes the hose may need to be mounted.
4.Control Panel
Please refer to the Control Panel section for detailed operating instructions.
5.Signal Output
From left to right, the signal indexes are #1 to #4, on which the signal cords shall be mounted.
6- Cylinder Seal Switch
Lift up the cylinder seal switch to seal the cylinders, and pull it down to release, so that the cylinders can be drained as needed.
7- Locking Nut
For locking the fuel distributor. To remove, move the locking nut 1cm higher so that the fuel distributor can be taken off.
8.Test Fluid Delivery Hose
This hose extends from the piston fuel pump, to supply test fluid to the fuel distributor. This must be mounted before starting to use the test bench. Once mounted, it is not necessary to take it off.
9.Pressure Balancing & Stabilizing Hose
This hose leads to the air-lock pressure balancing & stabilizing assembly. It is designed to push air out of the fuel distributor to ensure no air remains in the distributor.
10.Fuel Distributor
The fuel distributor has an inbuilt Φ13 fitting. Injectors of this size can be mounted to the distributor directly, while other injectors will need to use adapters. Please refer to the Accessories section for adapter details.
11 - Ultrasonic Bath
The Ultrasonic Bath must not be activated unless there is fluid in the bath, filled to the minimum level. To activate the ultrasonic bath, at least one injector must be connected to the signal cord, or else this may cause an error. Put injectors into the basket, then put the basket into the ultrasonic bath. Otherwise, there is a risk that the shock created by the activated injectors may damage the ultrasonic bath. Drain and clean the Ultrasonic Bath after use.
12.Fuel Distributor Mounting Ports
There are two sets of mounting ports for the fuel distributor. The set in the middle is for regular injectors, the other set are for injectors where the feed port and nozzle are not vertically centered, e.g. Siemens Piezo.
📯Packing List:
📯Deployment Workplace:
The injector test bench should be installed on a flat surface,away from flames and sparks.
In case the injector test bench needs to berelocated,you must first drainany remaining test fluid from the unit.
The injector test bench should be installed on a flat surface,away from flames and sparks.
In case the injector test bench needs to berelocated,you must first drainany remaining test fluid from the unit.
