I have finally got around to putting one of these seats together and have updated the pictures in a rough order.

The fittings come cable tied to the seat so you need to cut them free first.

The mounting frame slides through the holes in the front of the seat as shown and the mounting bracket is already screwed to the seat. All you need to do is loosen it and then slide the bar into one of the 2 grooves and screw the bracket back down. It can be a bit fiddly but once seated properly it will give a nice tight fit.   This allows the seat to be set in two different positions.

There are 2 adaptors, shown side by side in the pictures, which fit different bike frame configurations.
The larger brackets dimensions are 11cm wide x 6cm deep and the smaller bracket is 8cm wide x 4cm deep

The bracket itself only fits one way up, if you find the seat support not clicking in and it feeling loose, its upside down, as I worked out after a bit of head scratching :)


Any questions let me know


The front Bilis Junior Polisport baby carrier allows children of 9 months and above to be transported safely on board the bicycle. It has adjustable elements to adapt to the progressive growth of the smallest.

Characteristics:
- Front mounting bracket (Ø22-Ø40 tubes)
- Weight of children from 9 to 15 kg
- Complies with the European standard EN 14344
- 3-point security harness
- Protection for feet and retention
- Safe and adjustable footrest in 5 positions, washable cushion
- Easy assembly, resistant to UV rays
- Security arch