Organize up to ten listed compatible Dell OptiPlex Micro systems in 5U of a standard 19-inch rack. This finished PETG mount holds each computer vertically in an open, ventilated bay while keeping front and rear ports accessible.

The lower compartment provides space for organizing up to ten compatible power adapters and cable slack. Adapter and cable dimensions vary, so confirm your equipment before ordering.

Key features

• Up to 10 listed compatible Dell OptiPlex Micro systems
• Standard 19-inch rack; approximately 5U high
• 200 mm / 7.87 in total depth
• 182 mm / 7.05 in device-bay depth
• 21 mm / 0.83 in rear cable-service space
• Open front and rear; ventilated side walls and dividers
• Lower power-adapter storage
• Finished PETG physical product
• Black, White, or Gray

Compatibility

Dell Supported models: OptiPlex 3020, 9020, 3040, and 7040 Micro, OptiPlex 3050, 3060, 3070, 3080, 3090, 3000, 5050, 5060, 5070, 5080, 5090, 5000, 7050, 7060, 7070, 7080, 7090, and 7000 Micro; OptiPlex Micro 7010, Micro Plus 7010, Micro 7020, and Micro Plus 7020; and OptiPlex 3000 Thin Client.

Fit note: Not every Dell computer described as Micro, MFF, or Micro Form Factor uses the same enclosure. Compare the exact model number and dimensions. External antennas, stands, optical modules, security brackets, cable covers, oversized feet, and similar accessories can affect fit.

Not listed for Dell Pro Micro, Dell Pro Max Micro, OptiPlex Ultra, Precision Compact, Wyse 5070, or unnamed models.

Included

• One Rack Forged 10-device, 5U, 19-inch rack-mount assembly
• Hardware to join the two printed five-bay sections

Not included

• Dell computers, power adapters, or cables
• Rack screws or cage nuts
• Rack, rails, shelves, electronics, or pictured accessories

Installation

1. Confirm model and dimensions.
2. Join the two sections using the included hardware.
3. Secure with suitable rack screws and cage nuts.
4. Insert compatible computers and route cables without blocking ventilation.