Ultimate Duty Angle Adapter - Standard USA exterior acme male and internal female threads. Will fit all standard threaded poles. Hardware included. These 2 angle adapters have linked together to reach areas hard to access. On the bottom adapter you have 90 Degree angle on one side, turn pole around and you have 90 degrees on that side. The top adapter works the same way but can turn north-south-east and west, giving you the ability to reach areas you could not otherwise get to. Take wing nut off and screw out of top adapter and turn in the new direction needed and reattach.

Designed for heavy duty tasks. All metal design. Built solid and tough. When you need something that is guaranteed not to break, this is the angle adapter you need. 4-piece fall protection system attached to cushion unit if dropped accidently. Rubber rings at top ensure it does not slip or twist when it is screwed in. Set screw at base ensures it will not turn or move on pole.

Make sure when you change angles with the adapters that when you screw it back together, that the teeth in the center interlock with one another. Do not tighten if the teeth are on the top of one another as this could cause the teeth to strip the gears. This is very important!!  And it is the only way to ruin this device. Wipe lightly with oil monthly. To keep from rusting do not leave outside or exposed to the elements when not in use. 

Joel Humphries - Inventor of Super Angle Adapter.

Multi-Positional Snake Angle Adapter — Adjust the Angle and Direction You Need

Give your pole-mounted attachment more positioning options with this new Multi-Positional Snake Angle Adapter. Its adjustable joints let you change the attachment’s angle, while the repositionable top section lets you set its direction.

The adapter connects to standard poles and attachments with matching 3/4"-5 Acme threads, using external male threads at the top and internal female threads at the bottom.

Features and Benefits

  • Multi-positional adjustment: Set the adapter in straight or bent positions to suit your task. Photos show several positions and the bend demonstrated by the adapter.

  • Repositionable top section: Remove the screw in the middle section, turn the top adapter to the direction you need, then reinstall the screw to secure it.

  • Three rubber impact protection rings: Located around the adapter’s body to help protect it from bumps and impacts.

  • Two friction rings at the top: Help resist unwanted movement when an attachment is screwed onto the male threads.

  • Bottom set screw: Helps secure the connection to your pole.

  • Standard Acme connections: Top male and bottom female 3/4"-5 Acme threads let the adapter connect between a compatible pole and attachment.

Connection Details

  • Top: External male 3/4"-5 Acme threads

  • Bottom: Internal female 3/4"-5 Acme threads

  • Thread specification: ¾-inch diameter, 5 threads per inch

Condition: New

Please review the photos for the adapter’s construction, connections, and positioning options. Confirm that your pole and attachment have matching 3/4"-5 Acme threads before purchasing.