Peugeot 205 GTI-6 Custom Wiring Harness BRAND NEW With 36-Way ECU Connector

Peugeot 205 GTI-6 Custom Wiring Harness BRAND NEW 36-Way ECU Connector

Emerald full generic wiring harness for 4 cylinder engines. Specific loom for PEUGEOT 205 GTI-6 ONLY

Designed and assembled by Emerald M3D with high quality automotive materials to provide ease of installation and flexibility for a wide variety of 4 cylinder engines in conjunction with our standalone ECU. Available for both the K3 ECU and K6 ECU. All wires are twisted to avoid any possible interference and labeled for easy installation. The loom is available in a variety of base configurations:

• Inductive crank sensor 
• Inductive crank & cam sensors
• Digital crank sensor
• Inductive crank sensor & digital cam sensor
• Digital crank sensor & inductive cam sensor
• Digital crank sensor & digital cam sensor

 In addition to the base configurations, there are also two options of Coil setup:

• Coil Pack
• Coil on Plug (4 separate Coils) (K6 ECU, NON amplified coils only).

 Due to the custom nature of a wiring loom. There are hundreds of different options and full customisation available on this loom. If you proceed with the purchase, you will receive a loom based on your options selected and the details below. If you would like to discuss anything specific, please contact us via email or via telephone at +44 (0) 1280 70 1919 with your requirements and a member of our technical team will be happy to assist. Standardised lengths (shown from ECU to connection): 

• Crank sensor wires (shielded), unterminated - 1700mm
• Cam sensor wires (shielded), unterminated - 1700mm
• Coil Pack wires, unterminated - 1850mm
• Coil on Plug, unterminated:
  • Coil 4 - 1550mm
  • Coil 3 - 1650mm
  • Coil 2 - 1750mm
  • Coil 1 - 1850mm
• Coil on Plug option caters for NON amplified coils only (2 wires for each coil).
• Fuel Injector wires, junior timer or EV6 connectors:
  • Inj. 4 - 1550mm
  • Inj. 3 - 1650mm
  • Inj. 2 - 1750mm
  • Inj. 1 - 1850mm
• Air temp sensor wires, junior timer connectors - 2000mm
• Coolant temp sensor wires, junior timer connectors - 2000mm
• MAP sensor wires, unterminated - 2000mm
• TPS sensor wires, unterminated - 2000mm
• Lambda sensor wires, unterminated - 1960mm
• Main Relay - 530mm
• Fuel Pump Relay wire, unterminated - 2000mm
• Cooling Fan wire, unterminated - 2000mm
• Shift-light, unterminated (not included with Coil on plug option) - 1850mm
• Tacho Driver wire, unterminated - 1850mm
• Battery +12v wire, unterminated- 1700mm
• Earth wire, unterminated - 1700mm

 The majority of sensor and output wires are supplied unterminated so that wire length can be trimmed and connectors of your choice fitted as required.Various suitable connectors are available from the "Accessories" area of our shop.  Due to the custom nature of the wiring loom, lead times can vary. Estimated lead time between 5 to 10 working days and please contact us if you require a specific lead time.