Product Type: Brake Caliper; Condition: New; Location: Rear Right; Number of Pistions: 1in.; Pads Included: No; Piston Material: Steel; Piston Outside Diameter: 37.9984mm; Piston Outside Diameter: 1.496 in.; Bleeder Port Measurment: M7 x 1.0; Inlet Port Measurement: 0.39; Installation Hardware Included: Yes; Mounting Hardware Included: No; Unit Finish: Zinc-Coated; Unit Color: Silver; Country of Origin: CN

OEG Parts New Rear Right Brake Caliper Compatible With Lexus ES350 3.5L 2007-2012, Compatible With Toyota Avalon 3.5L 2008-2011 19-B3130 4783006050 4783006052 4783033210 4783033211 PICBC2030 19B3130

Specifications

OE Manufacturer:
Product Type: Brake Caliper
Weight: 5.2500
Condition: NEW
Unit Source:
Design / Type:
Design / Type:
Design / Type:
Starter Series:
Location - General: Rear
Location - Specific: Rear Right
Design Type:
Voltage:
Amperage:
kW:
Rotation:
Regulator/Fan:
Tooth Count:
Spline Count:
Polarity:
Shaft Type:
Duty Cycle:
Horsepower:
RPM:
V-Set:
Circuit Type:
Plug Code:
Plug Orientation:
Pulley Class:
Case OD (mm):
Overall Length (mm):
Gear OD (mm):
Pulley Belt Width (mm):
Pulley OD (mm):
Shaft Overall Length (mm):
Shaft OD (mm):
Clutch Type:
Operating Mode:
Pads Included: No
Connection Type:
Piston Material: Steel
Number of Pistons: 1
Piston Outside Diameter (in): 1.496
Piston Outside Diameter (mm): 37.9984
Bleeder Port Measurement: M7 x 1.0
Inlet Port Measurement: 0.39
Ignition Type:
Housing Material:
Torque (ft. lbs):
Pulley OD (in):
Crankshaft OD (in):
Terminal Type:
Sensor Included:
Idle ACM Included:
Cage Wheel Included:
Wiring Harness Included:
Number of Pistons: 1
Caliper Pistion OD (mm): 37.9984
Motor Overall Length (in):
Motor OD (in):
Wheel OD (in):
Bearing Inside Diameter (mm):
Bearing Outside Diameter (mm):
Bearing Width (mm):
Rotor Inside Diameter (mm):
Rotor Outside Diameter (mm):
Rotor Overall Length (mm):
Rotor Shaft Outside Diameter (mm):
Rotor Shaft Overall Length (mm):
Mounting Hardware Included: No
Installation Hardware Included: Yes
Mounting Type:
Mounting Type:
Mounting Type:
Cap Design:
Plunger Type:
Includes:
Includes:
Number of Mounting Holes:
Number of Terminals:
Number of Wires:
ETB Inside Diameter (in):
Terminal Type:
Hose Inside Diameter:
Minimum Flow Rate:
Minimum Pressure:
Unit Finish: Zinc-Coated
Unit Color: Silver
Number of Pieces:
Country of Origin: CN
Country of Use:
Notes:
Other Part #: 19-B3130 4783006050 4783006052 4783033210

Customer Service Available 7 Days A Week

Lexus ES350 2012-2012 V6 3.5L 3456cc Rear Right; Base Before 09/2011
Lexus ES350 2007-2011 V6 3.5L 3456cc Rear Right; Base
Toyota Avalon 2011-2011 V6 3.5L 3456cc Rear Right; Base
Toyota Avalon 2008-2011 V6 3.5L 3456cc Rear Right; Limited
Toyota Avalon 2008-2008 V6 3.5L 3456cc Rear Right; Touring
Toyota Avalon 2008-2010 V6 3.5L 3456cc Rear Right; XL
Toyota Avalon 2008-2011 V6 3.5L 3456cc Rear Right; XLS
Toyota Camry 2009-2009 L4 2.4L 2362cc Rear Right; Base
Toyota Camry 2007-2008 L4 2.4L 2362cc Rear Right; CE
Toyota Camry 2011-2011 L4 2.4L 2362cc Rear Right; Hybrid Japan Built and USA Built; Before 12/2010
Toyota Camry 2007-2010 L4 2.4L 2362cc Rear Right; Hybrid
Toyota Camry 2007-2009 L4 2.4L 2362cc Rear Right; LE
Toyota Camry 2007-2009 L4 2.4L 2362cc Rear Right; SE
Toyota Camry 2007-2009 L4 2.4L 2362cc Rear Right; XLE
Toyota Camry 2011-2011 L4 2.5L 2494cc 152cid Rear Right; Base Japan Built and USA Built; Before 12/2010
Toyota Camry 2010-2010 L4 2.5L 2494cc 152cid Rear Right; Base
Toyota Camry 2011-2011 L4 2.5L 2494cc 152cid Rear Right; LE Japan Built and USA Built; Before 12/2010
Toyota Camry 2010-2010 L4 2.5L 2494cc 152cid Rear Right; LE
Toyota Camry 2011-2011 L4 2.5L 2494cc 152cid Rear Right; SE Japan Built and USA Built; Before 12/2010
Toyota Camry 2010-2010 L4 2.5L 2494cc 152cid Rear Right; SE
Toyota Camry 2011-2011 L4 2.5L 2494cc 152cid Rear Right; XLE Japan Built and USA Built; Before 12/2010
Toyota Camry 2010-2010 L4 2.5L 2494cc 152cid Rear Right; XLE
Toyota Camry 2011-2011 V6 3.5L 3456cc Rear Right; LE Japan Built and USA Built; Before 12/2010
Toyota Camry 2007-2010 V6 3.5L 3456cc Rear Right; LE
Toyota Camry 2011-2011 V6 3.5L 3456cc Rear Right; SE Japan Built and USA Built; Before 12/2010
Toyota Camry 2007-2010 V6 3.5L 3456cc Rear Right; SE
Toyota Camry 2011-2011 V6 3.5L 3456cc Rear Right; XLE Japan Built and USA Built; Before 12/2010
Toyota Camry 2007-2010 V6 3.5L 3456cc Rear Right; XLE

*NOTE: "M.T" Indicates Manual Transmission / "A.T" Indicates Automatic Transmission*
Please Reach Out To Customer Service To Confirm Fitment, If Necessary.

Toyota: 4783006050, 4783006052, 4783033210, 4783033211
Lexus: 4783033210, 4783033211
PIC: PICBC2030
Cardone Remanufactured: 19-B3130

Alternators Starters MotorsWindow  RegulatorsWiper MotorsComponentsElectronics

All of our products are covered by a one year warranty from the date of purchase.

We offer warranty for products that have a manufacturing defect due to materials or workmanship. The warranty does not cover failure due to abuse, misuse, improper installation or modifications. We are not liable for the cost of installation, removal or any other expenses beyond the original purchase price of the item.

It is the responsibility of the customer to verify the correct application information prior to purchasing any product from our eBay store. All purchases made in error may be returned within 30 days from the date of purchase and are subject to a 20% restocking fee. The product must be returned in its original condition including the packaging.

Free shipping on purchases shipped to all 50 states.

We offer international shipping through eBay global shipping program.

We process and ship orders within one business day of the order information being received. With the exemption of U. S. holidays.

Expedited orders including next day, second day and third day delivery methods are processed and shipped the same business day if checkout is completed by 5pm Eastern Time.

We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. OEG Parts is not responsible for carrier delays such as weather or natural disasters.

All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return

To receive an RMA Please contact OEG Parts Customer Service.

All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.

Immediate payment is required during checkout. We will process and ship orders once checkout is completed.

Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
We always recommend cross referencing a part number to ensure fitment as well.

You may Contact Us by locating the "Contact Seller" Button within a listing.

After making a purchase, the phone number will be visible to you through eBay when you click on "Contact Seller".

You can also find our phone number by clicking on FAQs > Other

It is against eBay Policy to provide you our contact information any other way.