Welcome to our store!
To avoid you buying the wrong parts, DO CHECK the compatible chart above before placing order.
-
Choose a vehicle from the "My Garage" list. Or
-
Enter your vehicle's details with Year / Make / Model / Trim / Engine. Or
-
Contact us: Ask us for double check.
Fitment:
For 2002-2006 Chevrolet Avalanche 2500
For 2001-2003 2005-2006 Chevrolet Silverado 1500 HD
For 2007 Chevrolet Silverado 1500 HD Classic
For 2001-2004 2006-2010 Chevrolet Silverado 2500
For 2001-2010 Chevrolet Silverado 2500 HD
For 2007 Chevrolet Silverado 2500 HD Classic
For 2001-2007 Chevrolet Silverado 3500
For 2007 Chevrolet Silverado 3500 Classic
For 2007-2010 Chevrolet Silverado 3500 HD
For 2000-2010 Chevrolet Suburban 2500
For 2001-2003 2005-2006 GMC Sierra 1500 HD
For 2007 GMC Sierra 1500 HD Classic
For 2001-2004 GMC Sierra 2500
For 2001-2010 GMC Sierra 2500 HD
For 2007 GMC Sierra 2500 HD Classic
For 2001-2006 GMC Sierra 3500
For 2007 GMC Sierra 3500 Classic
For 2007-2010 GMC Sierra 3500 HD
For 2000-2010 GMC Yukon XL 2500
For 2003-2009 Hummer H2
Introduction:
Car suspension is the system of parts like springs, shock absorbers, and linkages that connects a vehicle's wheels to its body, providing a smooth ride and stable handling by absorbing shocks and keeping the tires in contact with the road. It is a critical system that balances the conflicting needs of comfort and handling through components that work together to support the vehicle's weight, absorb road imperfections, and maintain consistent tire grip.
Install Ball Joint:
Remove the wheel.
Loosen the nut securing the old ball joint to the steering knuckle.
Use a ball joint separator tool to separate the tapered stud from the steering knuckle.
Remove the old snap ring and the ball joint from the control arm.
Clean the mounting area on the control arm.
Press the new ball joint into the control arm until it is fully seated.
Secure the new ball joint with a snap ring, ensuring it is fully engaged.
Place the new rubber boot over the ball joint's stud.
Slide the new ball joint's stud into the hole in the steering knuckle.
Install the nut, hand-tighten it, and then use a torque wrench to tighten it to the manufacturer's specified torque.
Install control Arm:
Remove the wheel.
Disconnect the ball joint from the steering knuckle using a puller tool or by striking the knuckle.
Disconnect the sway bar link from the control arm.
Detach any other attached parts.
Loosen and remove the mounting bolts that attach the control arm to the chassis.
Position the new control arm into its mounting brackets on the chassis.
Secure the control arm to the chassis by installing and tightening the mounting bolts.
Attach the ball joint to the spindle and secure it with the nut and cotter pin.
Reconnect the sway bar link and any other previously removed components.
Fully tighten the control arm mounting bolts to the manufacturer's specified torque.
Install Sway Bar:
Remove the wheels.
Remove the nuts securing the end links to the sway bar and control arm.
Detach the old end links and slide them out.
Locate the sway bar's mounting brackets on the vehicle's frame or chassis.
Remove the bolts holding the sway bar brackets to the vehicle.
Carefully maneuver the old sway bar out from the vehicle.
Install the mounting brackets and hand-tighten the bolts, ensuring the bar is centered.
Insert the new end links, aligning the holes with the sway bar and control arm.
Secure the end links with the new nuts.
Tighten the sway bar bracket bolts to the manufacturer's specified torque.
Note:
After replacing the parts, a four-wheel alignment is required to ensure vehicle handling, tire wear, and safety.
Position:
Front+Lower+Upper+Left+Right
Package Included:
2 x Part Front Inner Tie Rod End-ES3488
2 x Part Front Sway Bar End Link-K80631
2 x Part Front Outer Tie Rod End-ES3609
2 x Part Front Lower Ball Joint-K6693
2 x Part Front Upper Control Arm And Ball Joint-K620053
| Item Specifics | |
|---|---|
| UPC | Does not apply |
| Brand | Motofactory |
| Manufacturer Part Number | 13663741 |
| Manufacturer Warranty | 1 Year |
| Placement on Vehicle | Front Lower Upper Left Right |
| Type | Control Arm & Ball Joint Assembly |
| Material | Alloy Steel |
| OE/OEM Part Number | 15224737,19207137,5579588,15665691,15891515,19149619 |
| Interchange Part Number | ES3488x2 K80631x2 ES3609x2 K6693x2 K620053x2 |
| Superseded Part Number | Front Driver and Passenger Side Replacements |
| Items Included | Mounting Hardware |
| Performance Part | No |
| Universal Fitment | No |
| Vintage Car Part | No |
| Features | Greasable |
| Adjustable | Yes |
| Quantity | 10Pcs |
About Us:
We are committed to making the best auto-parts products and providing you with better services.
So if you have any quesiton or problem, please fell free to contact us about that.
Payment:
Any payment can be accepted by ebay.
Shipping:
2-8 working days in transit.
Product will be shipped within 2 business days after full payment is received and verified.
USPS, UPS, FedEx shipping will be provided.
Delivery time is about 2-8 business days to most of addresses.
Returns:
30-day free return provided.
Contact Us:
Any quesiton or problem, do contact us please.
We are always online to answer.
Note: Do check the compatible chart before paying the items, or contact us for checking the compatibilities for your vehicles/cars/trucks.
