Eibach B12 Sportline Lowering Suspension Kit

Dedicated for:
  • VW Golf III (1H1), Vento (1H2), Golf III Van (1H1)

For detail vehicle specification see the corresponding table below.
Contains: Sportline coil springs and Bilstein shock absorbers.

The product images shown are for illustration purposes only and may not be an exact representation of the product.
Shock Absorber Type: Gas Pressure
Shock Absorber System: Monotube
Weight: About 24.9 kg
Reference: E95-85-003-03-22

VW vehicle models:

Slide the table for more details
Series Models Years Engine kW/HP Front Axle Load Rear Axle Load Lowering Front Lowering Rear
Golf III (1H1) 1.4 11.1991 - 08.1997 Petrol 40/55 950 kg 840 kg 45-50 mm 30-35 mm
1.4 10.1991 - 08.1997 Petrol 44/60 950 kg 840 kg 45-50 mm 30-35 mm
1.6 09.1992 - 08.1997 Petrol 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.6 07.1995 - 08.1997 Petrol 74/101 950 kg 840 kg 45-50 mm 30-35 mm
1.8 11.1991 - 08.1997 Petrol 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.8 11.1991 - 08.1997 Petrol 66/90 950 kg 840 kg 45-50 mm 30-35 mm
2.0 GL 08.1995 - 09.1997 Petrol 79/107 950 kg 840 kg 45-50 mm 30-35 mm
2.0 11.1991 - 08.1997 Petrol 85/115 950 kg 840 kg 45-50 mm 30-35 mm
2.0 GTI 16V 08.1992 - 08.1997 Petrol 110/150 950 kg 840 kg 45-50 mm 30-35 mm
2.8 VR6 08.1995 - 09.1997 Petrol 120/163 950 kg 840 kg 45-50 mm 30-35 mm
2.8 VR6 01.1992 - 08.1997 Petrol 128/174 950 kg 840 kg 45-50 mm 30-35 mm
1.9 SDI 07.1995 - 08.1997 Diesel 47/64 950 kg 840 kg 45-50 mm 30-35 mm
1.9 D 11.1991 - 08.1997 Diesel 47/64 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TD,GTD 11.1991 - 08.1997 Diesel 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TDI 09.1993 - 08.1997 Diesel 66/90 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TDI 04.1996 - 08.1997 Diesel 81/110 950 kg 840 kg 45-50 mm 30-35 mm
Vento (1H2) 1.4 11.1991 - 09.1998 Petrol 40/55 950 kg 840 kg 45-50 mm 30-35 mm
1.4 11.1991 - 09.1998 Petrol 44/60 950 kg 840 kg 45-50 mm 30-35 mm
1.6 09.1992 - 09.1998 Petrol 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.6 10.1994 - 09.1998 Petrol 74/101 950 kg 840 kg 45-50 mm 30-35 mm
1.8 11.1991 - 09.1998 Petrol 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.8 11.1991 - 09.1998 Petrol 66/90 950 kg 840 kg 45-50 mm 30-35 mm
2.0 GL 11.1991 - 07.1998 Petrol 62/84 950 kg 840 kg 45-50 mm 30-35 mm
2.0 11.1991 - 09.1998 Petrol 85/115 950 kg 840 kg 45-50 mm 30-35 mm
2.0 GL 05.1996 - 12.1997 Petrol 79/107 950 kg 840 kg 45-50 mm 30-35 mm
2.8 VR6 01.1992 - 09.1998 Petrol 120/163 950 kg 840 kg 45-50 mm 30-35 mm
2.8 VR6 01.1992 - 09.1998 Petrol 128/174 950 kg 840 kg 45-50 mm 30-35 mm
2.8 VR6 08.1995 - 04.1996 Petrol 120/163 950 kg 840 kg 45-50 mm 30-35 mm
1.9 SDI 04.1997 - 09.1998 Diesel 47/64 950 kg 840 kg 45-50 mm 30-35 mm
1.9 D 11.1991 - 09.1998 Diesel 48/65 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TD 11.1991 - 09.1998 Diesel 55/75 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TDI 09.1993 - 09.1998 Diesel 66/90 950 kg 840 kg 45-50 mm 30-35 mm
1.9 TDI 04.1996 - 09.1998 Diesel 81/110 950 kg 840 kg 45-50 mm 30-35 mm
Golf III Van (1H1) 1.8 08.1991 - 12.1997 Petrol 66/90 950 kg 840 kg 45-50 mm 30-35 mm
Additional information for Golf III (1H1), Vento (1H2), Golf III Van (1H1):
  • Without levelling control.
  • Except vehicles with 4WD.
  • Due to the usage of gas pressure technology of the B6 / B8 dampers the dimension of lowering / lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.
  • only for vehicles with plus axle
  • If replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.
Please also read the common information below before placing your order.
Common information:
  • If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover)
  • The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \K\ in your vehicle registration certificate or to find at the type plate of your car!)
  • Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on Eibach site
  • In case of non-conformance the items must not be fitted - please refer to your dealer.
  • Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available.
  • Mounting position - you can \read\ the mounting position of the springs from the imprint - have them installed just the way you read the imprint.
  • Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required.
  • Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs.
  • This already can be necessary from 40.000 kilometers OE-damper-milage.
  • The installation of Sport-Shock Absobers is recommended. As example Bilstein B8
  • Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.
  • Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given.
  • The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.
  • The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
  • If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.

Sport Performance Suspension System B12 Sportline made by Bilstein & Eibach.

Spring and Damper technology simultaneously engineered, tuned and extensively tested. Unparalled harmony between spring and damper with a progressive characteristic.

Precision responsive handling and excellent driving performance at low and high speeds. B12 Sportline springs offer a lower center of gravity for better grip and traction and help reduce understeer as well as oversteer. B12 Sportline springs find any imperfections in the road and adjust to give the smoothest ride possible.

Product is unused, original and fully worthwhile. Picture for illustration purposes only - actual kit may differ from shown.

Payment

You can use PayPal to make online purchases.

Shipping

We ship world wide by GLS, UPS and national post operators - please ask for quotation for delivery to your country.

Contact

Feel free to ask us. You can send a message.