Eibach B12 Pro-Kit Lowering Suspension Kit

Dedicated for:
  • Audi A4 Avant (8E5, B6), A4 Avant (8ED, B7)

For detail vehicle specification see the corresponding table below.
Contains: Pro-Kit coil springs and Bilstein shock absorbers.

The product images shown are for illustration purposes only and may not be an exact representation of the product.
Shock Absorber Type: Gas Pressure
Shock Absorber System: Monotube
Weight: About 25 kg
Reference: E90-15-006-16-22

Audi vehicle models:

Slide the table for more details
Series Models Years Engine kW/HP Front Axle Load Rear Axle Load Lowering Front Lowering Rear
A4 Avant (8E5, B6) 2.4 09.2001 - 12.2004 Petrol 120/163 1165 kg 1130 kg 30 mm 30 mm
2.4 09.2001 - 12.2004 Petrol 125/170 1165 kg 1130 kg 30 mm 30 mm
3.0 04.2001 - 12.2004 Petrol 160/218 1165 kg 1130 kg 30 mm 30 mm
3.0 09.2001 - 12.2004 Petrol 162/220 1165 kg 1130 kg 30 mm 30 mm
1.9 TDI 11.2001 - 12.2004 Diesel 74/101 1165 kg 1130 kg 30 mm 30 mm
1.9 TDI 06.2004 - 12.2004 Diesel 85/116 1165 kg 1130 kg 30 mm 30 mm
1.9 TDI 09.2001 - 12.2004 Diesel 96/130 1165 kg 1130 kg 30 mm 30 mm
A4 Avant (8ED, B7) 2.0 TFSI 11.2004 - 06.2008 Petrol 147/200 1165 kg 1130 kg 30 mm 30 mm
2.0 TFSI 06.2005 - 06.2008 Petrol 162/220 1165 kg 1130 kg 30 mm 30 mm
3.0 11.2004 - 05.2006 Petrol 160/218 1165 kg 1130 kg 30 mm 30 mm
3.2 FSI 01.2005 - 06.2008 Petrol 188/255 1165 kg 1130 kg 30 mm 30 mm
1.9 TDI 11.2004 - 06.2008 Diesel 85/116 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 09.2005 - 09.2006 Diesel 89/121 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 11.2005 - 11.2006 Diesel 93/126 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 11.2004 - 06.2008 Diesel 100/136 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 11.2004 - 06.2008 Diesel 103/140 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 06.2006 - 06.2008 Diesel 120/163 1165 kg 1130 kg 30 mm 30 mm
2.0 TDI 06.2006 - 06.2008 Diesel 125/170 1165 kg 1130 kg 30 mm 30 mm
Additional information for A4 Avant (8E5, B6), A4 Avant (8ED, B7):
  • Without levelling control.
  • Except vehicles with 4WD.
  • Due to the usage of gas pressure technology of the B6 / B8 dampers the dimension of lowering / lifting may vary slightly vehicle-specifically. Functionality of electronic dampers is not applicable . - If available, we recommend to use Pro-Tronic.
  • If replacement required: Please contact your dealer. - Please have your car documents, part numbers and sales receipt ready to give detailed information.
Please also read the common information below before placing your order.
Common information:
  • If not separately named, for vehicles with OE-lowered suspension, the dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • If not separately named, vehicles with OE-lifted suspension (e.g. Offroad-Package, Crossover)
  • The specifications indicated in the Components Certificate are for the classification of the item / vehicle. Please check the type Components Certificate number of your car and compare with the Components Certificate. (Letter \K\ in your vehicle registration certificate or to find at the type plate of your car!)
  • Please verify before fitting by means of the Components Certificate whether the delivered items (please see marking) are approved for your vehicle (please see area of use).You can find the current Components Certificate on Eibach site
  • In case of non-conformance the items must not be fitted - please refer to your dealer.
  • Mounting - we recommend to have our spring system installed by a qualified workshop only, that has skilled personnel and the required special tools available.
  • Mounting position - you can \read\ the mounting position of the springs from the imprint - have them installed just the way you read the imprint.
  • Wheel adjustment - after completion of the spring/suspension installation, checking the wheel adjustment is required.
  • Shock absorbers - if the standard shock absorbers are not fully operative anymore and their efficiency has worn off considerably, we strongly recommend to replace those by new standard shock absorbers or by sports shock absorbers, if using lowering springs.
  • This already can be necessary from 40.000 kilometers OE-damper-milage.
  • The installation of Sport-Shock Absobers is recommended. As example Bilstein B8
  • Here all wheel/tyre-combinations are possible, which are released by the wheel type testing institution. The instructions in the wheel Components Certificate have to be adhered to, except for: OE suspension is required.
  • Depending on engine, gearbox/transmission, equipment and vehicle tolerances lowering may differ from the values given.
  • The dimension of lowering is reduced by the dimension of lowering carried out by manufacturer.
  • The applicability of our products deals with standard cars. In any case of reconstruction (even with OE-accessory-parts), as the installation of an accessory-brake-system (e.g. ceramic-brakes), sport-suspension, LPG-(liquefied petroleum gas)-system for example, the usage of our products may be excluded.
  • The stated measurements are referring to new standard cars. Measuring points: vertical distance from the middle of the wheel hub to the bottom edge of the mud wing. Generally the stated measurements are nominal values, which can vary depending on every car.
  • If your vehicle has serial electronic damper control this will not be available anymore while using the B12- or Pro-Street-S-suspension kit. You will see a trouble code. This can be re-programed by an official garage/dealership. If available for your vehicle, we recommend to use Pro-Tronic to avoid the trouble code.

Eibach B12 Pro-Kit incorporates spring and damper technology engineered, tuned and extensivly tested by world-renowned Bilstein and Eibach. Thanks to this, the B12 Pro-Kit provides responsive handling and excellent driving performance in all conditions.

High-quality Eibach Performance Springs and specially adapted Bilstein Performance Dampers with gas pressure technology have been used for the successful B12 Performance Suspension Systems since 2011. This results in a world-class suspension system with a progressive characteristic and excellent driving performance.

Following the slogan “traction & attraction”, lowering the centre of gravity also improves the look of a car, making it appear more dynamic. Incomparable harmony between spring and damper, which in turn results in a world-class suspension system with a progressive characteristic.

B12 Pro-Kit suspension systems accomodate a lower center of gravity by up to 40 mm, allowing for better traction as well as greater looks.

Product is unused, original and fully worthwhile. Picture for illustration purposes only - actual kit may differ from shown.

Payment

You can use PayPal to make online purchases.

Shipping

We ship world wide by GLS, UPS and national post operators - please ask for quotation for delivery to your country.

Contact

Feel free to ask us. You can send a message.