Operation Methods:
- Connect the power cord to the host and connect the AC110V power supply.
- Turn on the POWER switch of the machine panel, and the LCD panel will shine.
- Press PITCH to set the spacing of parts to be counted and press "ENTER". Place the parts to count on the left side tray.
- Manually pull out the material belt and clamp it between the material plate and counting gear, and align the intermediate hole of the first part and blank space to the middle line of the material plate.
- Press the "STOP/RESET" button for 2 seconds to return the number to zero. Note: when pulling the material belt, the counting gear will rotate and count.
- Press the "SETTING" button to switch to manual and automatic mode. If you choose automatic mode, you must input the quantity you want to count. Otherwise, press "FORWARD" and the motor will not rotate.
- Pull the material belt by hand and wind it to the empty material plate. Press "FORWARD /RIGHT" to count.
- The motor will stop when the quantity arrives. Due to the inertia principle, the number of counts may be more or less than the set value of about 1, which can be manually rotated to the LCD display set value in the direction of the material disk, that is, the number of parts.
- After counting, press the "REVERSE /LEFT" tape and then roll it back to the original LEFT panel, and then stop rotating.
Installation
Mirror Installation
- Use the hexagonal plate hand to screw out the two hexagonal screws behind the pointing machine.
- Align the mirror with the hole of the dispenser and then screw on the screws.
Pallet Installation
- Use the screwdriver to screw up the 2 screws on the rotating shaft.
- Align the tray with the hole of the shaft and lock the screws.
Application
It is suitable for belt elements made of SMD material and for pulleys of any diameter, and widely used for counting the quantity of SMD materials such as resistors, magnetic beads, capacitors, diodes, ICs, various chips, and LED beads. It can be applied in the electronic product manufacturing industry, SMT processing factory, EMS professional electronic manufacturing service factory, SMD parts manufacturer, SMD parts supplier, parts counter, and tape packaging manufacturer for fully automatic IQC incoming inspection, counting of tape packaging and checking of missing parts, inventory management, and other operations.
Specification
Color: White
Shape: Rectangle
Style: Modern
Display: 3-digit LCD
Power Cord Length: 1.5m/ 4.9 ft
Assembly Required: Yes
Number of Items: 1
Power Supply: AC110V,60HZ
Power: 25W
Counting Range: -99999~99999PCS
Material: Aluminum, Steel
Process: Laser Cutting ( Gear Sheet ), Powder Coating ( Surface ), Computer Gong Production Process ( Machined Parts )
Pitch: 2mm/ 0.04in, 4mm/0.07in, 8mm/ 0.16in,10mm/ 0.31in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56 mm/ 2.2in
Width: 4mm/0.07in, 6mm/ 0.24in, 8mm/ 0.16in, 12mm/ 0.47in, 16mm/ 0.63in, 24mm/ 0.94in, 32mm/ 1.26in, 44mm/ 1.73in, 56mm/ 2.2in
Product Size: 76.5*30*19cm/ 30.12*11.8*7.48 in
Net Weight: 9.5kg/20.9 lbs
Gross Weight:10 kg/ 22.05 lbs
Package Included
1 * SMT/SMD Components Counter
1* Power Cord
1* Mirror
1* Chinese and English Manual
All Accessories for Assembly
- We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
