• Description:
  • The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts.
  • This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds.
  • This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.
  • Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads.
  • The bearing is secured to the shaft with set screws to prevent slippage.

    • UCF208-24 1-1/2Inch Bore Pillow Block Flange Bearing 4 Bolt Solid Base 10Pcs

    Description:

    The UCF pillow block mounted bearing series has four bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts.

    This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds.

    This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring.

    Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads.

    The bearing is secured to the shaft with set screws to prevent slippage.

    This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.

     

    Feature:

    If the bearing is crooked for example when you lay it on a flat table, it is not flat.

    Please don't worry. This is our self-alignment feature.

    These bearing are meant to have some play in them.

    When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct their own alignment once they begin to rotate.

    Because if the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen.

    So our self-alignment feature is a way to prevent this from happening.

     

    Specifications:

    Style: 4 Bolts

    Material: Cast Iron

    Bore Size: 1-1/2 Inch

    Static Load Rating: 17.8 kN/4000 lbs

    Dynamic Load Rating: 29.1 kN/6500 lbs

    Max RPM: 2200

    Quantity Per order: 10 Pieces

     

     

     

     

     

     



    Payment

    We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard payment.

    Shipping

    We ship worldwide.
    USPS First Class Mail or FedEx shipping, thank you.

    Standard Order Processing time:
    All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

     

    Returns

    30 DAY MONEY BACK SATISFACTION GUARANTEE
    Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
     In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.

    Contact Us

    Please send all correspondence through the eBay messaging system.
    Messages will be replied within 24 hours.

     

    About us

    Thank you for visiting our store. We hope you are satisfied with the item and our service.
    Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.

    Shop Category
     Store Home
     Suspension & Steering
     Lighting & Lamps
     Carburetor
     Boat
     Auto Valve
     Motorcycle Valve
     Module
     Fule Injector
     Brakes & Brake Parts
     Car Repair Kit
     Auto Engine System
     Auto Ignition System
     Auto Hub
     Motorcycle Ignition System
     Motorcycle engine system
     Auto Actuator
     Auto Motor
     Auto Inlet & Outlet System
     Auto Circuit Wiring Harness
     Transmission System
     Auto Switch
     Motorcycle Control System
     Auto Sensor
     Motorcycle Pump
     Auto Interior
     Exterior Trimming Parts
     Auto Pump
     Business & Industrial
     Home & Garden
     Radiators & Parts
     Golf Cart Parts & Accessories
     Other
    Hot Item
    Excellent Delivery

    content_src_url

    New List Item
    UCF208-24 1-1/2Inch Bore Pillow Block Flange Bearing 4 Bolt Solid Base 10Pcs


    We accept payment via Paypal,Google Pay,VISA,Master Card,American Express,Discover,eBay Mastercard payment.

    We ship worldwide.
    USPS First Class Mail or FedEx shipping, thank you.

    Standard Order Processing time:
    All items will ship within 3 days (Saturday afternoon, Sunday, and holidays except) after payment.

     

    30 DAY MONEY BACK SATISFACTION GUARANTEE
    Returns are permitted and must be initiated by the buyer within 30 days of the date of purchase.
     In order to return an item, you must contact to request an Return Merchandise Authorization Number (RMA). No return package will be accepted without a valid RMA number. All products are covered by our warranty against defects. If an item proves to be defective, please contact to have the product repaired or replaced.

    Please send all correspondence through the eBay messaging system.
    Messages will be replied within 24 hours.

     

    Thank you for visiting our store. We hope you are satisfied with the item and our service.
    Saving money for buyer and happy purchase are our goal.welcome to save my store for buy replacement parts. thank you.


    All rights reserved.

    On Feb 13, 2026 at 02:08:37 PST, seller added the following information:

    Datacaciques