Product Description:
9005 (Headlight High Beam) + H11 (Low Beam) + 9145/H10 (Fog Light)
There may be multiple models of bulbs in the same year, Please check your car manual or original bulb to confirm the bulb size, length is correct or not before purchasing to save your time.
 
Features:
 
Power 55W
Chips Type COB Chips
Lumens 10000 LM/Set
Color 6000K White
IP Rate IP67 Waterproof
Voltage DC12-24V
Lifespan 50,000+Hours
Model 9005(High Beam)+H11(Low Beam)+9145/9006 (Fog light)
Shell Material 6063 Aluminum
COB Working Temp -40-150 degree Celsius
 
Use for High Low beam&Fog Light, replacement halogen, not compatible with xenon/HID
 
Warm Tips:
1.The Filter System may not be 100% accurate or up to date, please check your owner’s manual. If you are still unsure of your bulb size, please do remember to send a message to us on your vehicle make, model, year, and other important information for further confirmation.
2. For Dodge, For Jeep, For Chrysler 2014-2016, after install our Headlight bulbs, if the bulb flicker or have error code, you can buy a decoder resistor to solve it.
3. For some vehicles, the high beam and DRLs share the same bulb, so the DRLs might have compatible issue after installing, you can try the decoders to fix.
4. It is not recommended to install the item on vehicle headlight with projector lens, lens lose brightness.
 
 
Package Include:
2x 9005 LED Headlight High Beam
2x H11 LED Headlight Low Beam
2x 9145/H10 LED Fog Light
2x T10 LED Bulbs(Free Gift)
New and old packaging will be shipped randomly


Note:
The 2 * T10 are the gift .
Multi-purpose: Used for Interior light, dome light, map light, door light, cargo/trunk light, glove box light, license plate light, corner light, side marker light, tail light, backup light, parking light, RV light, etc.
Installations: Easy to install, plug and play for most vehicles.
The T10 will not be returned or exchanged if there is any quality issue. if it unfit your car , you can send to others as gift. thanks for your understand!
 
 
Information:
a)Compatible List can not show up all Car model. Please check the Correct item size of your vechicle. it will work and fit.Thank you!
b)If you are unsure the item fit or not , please do remember send message to tell us your car make, model, year and other information which is helpful to check the item fit or not.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
For 2019 Ford F150 ,XL Crew Cab Pickup 4-Door 2.7L
 
 
Contact Us:
◆Thank you for purchasing our product!
◆Dear customer, if you have any inquiries, quality problems or inappropriate or other problems about our products, please do not open a return dispute or return application or neutral / bad evaluation directly, contact us through eBay information, we will give you a satisfactory solution .
◆We try to reply to your email within 24 hours, but due to the large volume of emails received every day and different time zones, we may not be able to respond to your email immediately. Hope your understanding, thank you.
 

 
SOME PROBLEMS FROM CUSTOMERS:

Q1: WHY MY LIGHTS ARE SO DIM ?

A: Most of the customers responded very brightly, and there have been a few customers who were in the same situation as you, and the reaction was not very bright. Later, after we fully understood, we found that because this light bulb is LED, the voltage requirement must reach 12-36V (brightness). brighter with higher voltage), while your raw halogen bulbs only need 9V to light up.

Because we send it out after 100% inspection before delivery, it is most likely caused by the insufficient voltage of your original lamp system. It is recommended that you or go to a professional auto repair shop to change the voltage of the bulb system, so that the lights can run brighter.

 

Q2: WHY THEY CANNOT BE LIGHTENED ?

A:This happens because your original halogen car lights have no positive and negative poles, but this is an LED light, which has positive and negative poles. A small number of customers (such as your car) happen to have the opposite positive and negative poles of our lights, which leads to non-lighting.

Don't worry, this situation is very easy to solve! You only need to lead a wire out of the positive and negative poles and reverse them to make the light bright. If you can't operate it yourself, we suggest that you can go to a professional auto repair shop to modify it, thank you!

Datacaciques