The T&B K14‑10F‑M is a high‑quality, non‑insulated fork (spade) terminal rated for 16–14 AWG wires, with a #10 stud hole. Manufactured by T&B, it features a brazed‑seam, serrated barrel for secure crimping and is designed for use in enclosed or protected wiring applications where insulation on the terminal is not required. It offers a reliable connection in control and instrumentation panels.

Key Specifications

  • Wire size range: 16–14 AWG. 

  • Stud (bolt) hole size: #10. 

  • Insulation: Non‑insulated type. 

  • Material: Copper body (electrolytic copper) with tin plating (for corrosion resistance) typical of T&B fork terminals. 

  • Barrel: Brazed seam barrel design, barrel is serrated internally for improved pull‑out strength. 

  • Strip length (wire insertion) recommended: ~¼ inch. 

  • Catalog / part number: “K14‑10F‑M” (some listings use K14‑10F‑M, others K14‑10 F‑M) – the “M” suffix is part of the T&B part numbering. 

  • Typical approvals: UL and CSA (for many of T&B terminals in this line) — while the exact spec sheet for K14‑10F‑M may need to be referenced for exact ratings. 

Features & Benefits

  • Ease of installation – being a fork (spade) type terminal allows you to slip the terminal under a screw or bolt without having to fully remove the mounting screw (unlike ring terminals). 

  • Reliable mechanical retention – the brazed seam and serrated barrel give higher pull‑out strength, meaning the wire stays securely crimped. 

  • Solid conductor connection – The non‑insulated design is suitable for use where the terminal will be in a protective block or enclosure, where insulation is not required externally, allowing better conductivity and less bulk.

  • Standard size compatibility – With a #10 stud hole, this terminal fits many common panel studs or equipment connection points.

  • Suitable for lower gauge wires – The 16–14 AWG range is common for control wiring, small relays, switchgear connections, etc.

Typical Applications

  • Used in panelboards, motor control centers, relay panels, terminal blocks, control wiring, where a fork/spade terminal is preferred and insulation may not be required.

  • Good for connections to binding posts, stud type terminals in control cabinets, or where frequent disconnection is needed (fork makes this easier).

  • Environments where the terminal will be enclosed or where additional insulation is not necessary externally.

Considerations & Use Tips

  • Being non‑insulated, you must ensure no exposed conductor poses a short risk (i.e., maintain appropriate clearance to adjacent live parts).

  • Choose the correct crimp tool specified by T&B (or equivalent) for that terminal size — this ensures a reliable crimp and good mechanical/electrical performance.

  • Ensure that the stud (#10) you are connecting to matches the terminal’s hole size and tightens properly to provide firm contact.

  • Since it’s for 16–14 AWG, do not use it for heavier gauge wires (which require larger terminals) or finer wires (which may not fill the barrel properly).

  • If the environment demands insulation (moisture, vibration, exposed wiring), consider an insulated version instead.


We offer a no-DOA guarantee within eBay's return policy timeframe, allowing you to test and inspect the item to 100% satisfaction.

Condition:
* New, Old Stock in OEM Packaging. As Pictured.

* Out of his original package.

* An item in excellent condition with no functional defects. 

* The box or item might show signs of wear due to shelf wear, etc.

* Please refer to the pictures for a clear view of the item. 

 * ITEM SHIPS AS SHOWN IN THE PHOTO.