Dear customer,
When there might be a difference between the automatic generated specifications by the Ebay system, and the hand written/typed description, then please be aware that the only correct description is what's written by our selves here in the description.
Specifications above might be slightly different.
Thanks for your understanding.
INCLUDING SIDE MOUNTINGS
EXCLUDING POWER SUPPLY
EXCLUDING CABLES
See photos for actual item!
Price is for 1 item.
Key Features
| Bandwidth | 4.95 Gbps |
| Video Input | 1 x VGA 2 x HDMI |
| Video Output | 1 x RJ45, HDBaseT |
| Audio Input | 1 x 3.5 mm Mini analog audio (VGA only) |
| Firmware Updates | 1 x Mini USB |
| Power Connector | 1 x Captive screw |
| Power Consumption | 6 W (15 W when paired with optional HDVS-RX Receiver) |
| Audio | Passes two-channel PCM |
| Resolution | Video: Up to 1080p Computer Graphics: Up to 1920 x 1200 |
| Transmission Distance | 230' (70 m) @ 1080p over Cat6a/7 197' (60 m) @ 1080p over Cat5e/6 |
| Temperature | Operating: 32 to 104°F (0 to 40°C) Storage: -4 to 140°F (20 to 60°C) |
| Certifications | CE, FCC, RoHS, and cULus for power supply |
| Dimensions | 1.5 x 5.1 x 3.9" (3.8 x 12.7 x 10.2 cm) |
| Weight | 0.4 lb (0.2 kg) |
The AT-HDVS-TX VGA/Audio plus Two HDMI to HDBaseT Extender Switcher with Display Control from Atlona allows you to transmit HDMI and VGA signals over HDBaseT with resolutions up to 1080p and 1920 x 1200. It features two HDMI inputs and one VGA input with analog audio. A single HDBaseT output lets you send one of the input signals to any Atlona HDBaseT receiver or display with an HDBaseT input at distances up to 230'. The transmitter can be powered using a separately available power supply, or from compatible receivers using power of category cable. It can also supply power to receivers over category cable when connected to the power supply.
When used with the optional AT-HDVS-RX Receiver, you gain RS-232 display control and input selection of any of the three input sources. It can also de-embed the two channels of balanced audio on output to send to an amplifier. The transmitter is firmware-upgradeable via a USB port and includes a pair of mount ears for attaching underneath a table, desk, or stand. A captive screw connector for the power input is also included, allowing you to cut the cable to a desired length, reducing cable clutter.
Note: A 5V hot plug event is used to trigger input selection on optional receiver. If a 5V signal is not detected, the source will not change.
Note: It is possible that some displays may have issues with VGA sources that don't have the same timings as HDMI sources used with the same displays.
Comes as shown on picture, if something is not on the picture it's not included unless stated otherwise