New Design - Rubber Motorcycle Tank Pad
Universal Fit - Perfect Protection
Just in, this design is exclusive to this store and not available anywhere else. Fits most makes and models. Double sided adhesive included but unattached to the rubber.
Material: Flexible Rubber
- Separate double-sided adhesive (included)
- Height: 21cm
- Width: 11cm (Top segment), 11cm (Bottom segment)
- Thickness: 4mm (thickest parts)
Please use the measurements provided to check fitment on your tank.
Installation Guide:
1. Clean the tank thoroughly from grease/wax/polish. Use IPA cleaner if possible.
2. Place the rubber pad on the tank, align it and mark with paper tape.
3. Peel white/yellow side of the adhesive and apply it to the pad. Leave it for a few hours to bond.
4. Now peel the red side and attach to the tank.
Tip: Use a precision screwdriver or a pin to find separation of the red layer.
5. Allow 12 hours for the pad to set in. Do not ride straight away.
The separate adhesive provided is double sided & clear in colour. Please ensure you peel both sides
- The separate adhesive provided is double sided & clear in colour. Please ensure you peel both sides.
- Do not apply on fresh paint.
- Use a heat gun or hair dryer if you need to take the pad off.
KAWASAKI Z7 Z500 Ninja 500 ZX-6R ZX-4R (2024 onwards)
KAWASAKI Z1000 (2014-2017)
KAWASAKI Ninja/Versys 650 Ninja 1000SX (2020 - on)
KAWASAKI VERSYS 1000 S (2021 - on)
KAWASAKI ZZR1400 (2012 - 2020)
KAWASAKI NINJA H2 SX (2018 - 2022)
KAWASAKI Z750 (2007 - 2012)
KAWASAKI Vulcan 650 S (2015-on)
KAWASAKI ZX-7R (1996 - 2003)
KAWASAKI ZX-9R (1994 - 2002)
KAWASAKI ZX-10RR (2021 - on)
KAWASAKI ZX-10R (2011 - 2018)
KAWASAKI Z650 (2020 - on)
KAWASAKI Z900RS (2017 - on)
KAWASAKI Z650 RS (2022 onwards)
KAWASAKI ER-6F (2012 - 2017)