FOXWELL NT301 CAN OBDII/EOBD Code Reader

[Vehicle CEL Doctor] The NT301 obd2 scanner enables you to read DTCs, access to I/M readiness status, figure out the root reason of check engine light or MIL turned on, monitor sensors test, read live data and retrieve VIN of your vehicle. The fault code only can be cleared after repair finished by NT301, as like all the obd2 code readers' working principle
[Accuracy & Streams] Live data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
[Worthy to Own] Recommended by most professional mechanics on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen and 1-year seller assurance with EXCLUSIVE tech and service team. Plug & Play, no need to update before using. Available to windows system. NOT support ios and Mac
[S-mog Check Helper] Read/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident e-missions test
[Home Necessity] Open to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and great choice for Home and Autoshop Mechanics. This scanner for car only supports to read the fault code of engine system, not support ABS or SRS
[OBDII Protocols & Compatibility] The NT301 supports OBDII protocols like KWP2000, J1850 VPW, ISO9141, J1850 PWM and CAN. The device is compatible with 1996 US-based, 2000 EU-based and Asian cars, light trucks, SUVs.Although Fiat/ALFA/Lancia is the CAN protocol, it is not a standard OBD2 protocol. Some of the French PEUGEOT, Citroen, Renault models, South Korea Ssangyong, Russia Lada, VAZ, UAZ, GAZ is non -standard OBD2 protocols. Check compatibility with your vehicle before purchase

The Foxwell NT301 obd2 code scanner can read and erase codes which can also retrieve a wealth of information from the Engine Control Unit (ECU). The ECU is what triggers the Check Engine Light when there is a problem with your car. Parts might cause your check engine light on include:

#1. Gas Cap

#2. Oxygen Sensor

#3. Air Fuel Ratio Sensor

#4. Mass Air Flow Sensor

#5. Ignition Coils

#6. Spark Plug Wires

#7. Spark Plugs

#8. Thermostat

#9. EGR Valve

#10. Evaporatative Emission Canister Purge Valve(EVAP)

#11. Catalytic Converter.

Product Features:

1. Supports multiple code requests: Generic, manufacturer specific and pending codes.

2. Clears codes, turns off Check Engine Light (CEL) and resets monitors.

3. DTC definition can be automatically displayed after reading, press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

4. Reads freeze frame data which shows engine conditions such as fuel trim, fuel pressure, engine coolant temp, etc. at the time the Malfunction Indicator Lamp(MIL) was set.

5. Reads, records, graphs & playbacks(data logging) live sensor data.

6. Reads live O2 sensor/on-board monitor test data.(Full OBD modes including Mode 6 and Mode 8)

Enhanced OBD II functions

NT301 obd2 scan tool can not only read and clear engine fault codes, save money for you, but also have some enhanced functions which could help you find some deep problems so that makes your diagnosis easier.

LED Notifications: Red-Yellow-Green LEDs and build-in speaker indicate the readiness status for smog check. This engine diagnostic tool can also help catch intermittent problems or confirm repairs during a drive cycle.

Data Log: The NT301 engine code reader records PIDs for later use to help you diagnose intermittent driving performance problems which can not be determined by any other methods.

DTC Help: Press "HELP" button with DTC guide for possible causes if codes show the small "?" icon.

VIN Retrival: Automatic VIN acquisition and decoding make it much easier to read manufacturer specific codes and enhanced mode 6 data.

Print Data: If you are unable to determine the problem, you can print out the diagnostic data and send the data to your mechanic for help.

Quick state emissions readiness check and drive cycle verification.

red-yellow-green leds and build-in speaker indicate emissions monitor status,

they can also help catch intermittent problems or confirm repairs during a drive cycle.

Three multilingual package for options:

(1) English, français, Español, Deutsche and italiano

(2) English, Português, Magyar, Nederlands, svenska

(3) English, русский,

FOXWELL NT301 Diagnostic Tool Support Car List :

1. America Car List: (include Brazil)
Need standard obd2 , and release from 2001 years to now
Fit for Chrysler ,Fit for Ford ,Fit for GM ,Fit for Jeep

2. Europe Car List:
Need standard obd2 , and release from 2004 years to now
Fit for Alfa Romeo ,Fit for SAAB ,Fit for Acura ,Fit for Opel, Fit for A udi ,Fit for Seat ,Fit for Peugeot ,
Fit for Bentley ,Fit for Skoda ,Fit for Daewoo, Fit for Benz ,Fit for Daihatsu ,Fit for Land Rover
Fit for BMW ,Fit for Vauxhall ,Fit for Citroen, Fit for Volvo ,Fit for Fiat ,Fit for VW ,Fit for Ford ,Fit for Jaguar

3. Asia Car List: (include Australia)
Japanese car Need standard obd2 , and release from 2006 years to now
Fit for KIA ,Fit for Isuzu ,Fit for Honda ,Fit for Mitsubishi, Fit for Hyundai ,Fit for Dacia ,Fit for Lexus ,Fit for Mazda
Fit for Nissan ,Fit for Subaru ,Fit for Suzuki, Fit for T oyota

4. Chinese Car List
Chinese car Need standard obd2 , and release from 2011 years to now
Fit for BYD, Fit for Chery, Fit for Geely, Fit for Great Wall, Fit for Karry

NOTE:
for Ssangyong Actyon, Kyron, Rexton, from 2011-2017 years.
for Ssangyong Korando, from 2013-2017 years
for Renault cars from 2016-2018 years.
Does not support for Renault / Dacia Logan , Clio.
Does not support for LADA, UAZ, VAZ

No Car OBD2 Scanner can work for all cars, If the device does not fit for your car, please try to test on another newly car.

More Detailed Feature About Foxwell Scanner NT301

I/M Readiness Hotkey for Check The I/M Readiness is a vital tool to evaluate a vehicle's compliance with state e-missions programs before inspection, with hotkey for swift checks.	Friendly and Standout Design it shines among competitors due to its integrated body, user-friendly design, compact size, organized keypad, intuitive menu, 2.8" color screen.	Optional Carrying Case（Need to add） With this protective carrying case for the Foxwell NT301 scanner, you can prevent damage whether you store it in a trunk, toolbox, or garage.	Optional Extension Cable It is designed to extend the OBD2 cable on your vehicle's OBDII protocol, reducing distance limitations and preserving your scan tool's OBD connector.

Stpe1: Download the update tool from foxwell official website, connect the NT301 to PC and login in the foxwell program , the device will be automatcially detected.

Stpe2: You can go to setting , select the language of your software package.

Step3: Click online update, it will download the software, then click on Offline update, you may install the patch.

Notice:
All of our user manual are English in the package,
But we have French ,Spanish ,German language user manual on the foxwell office website, (foxwelltech.com).
you can download it yourself, thanks

Package Including:

1 x FOXWELL NT301 Diagnostic-Tool
1 x English User Manual
1 x USB cable