.................. 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)

Center................ 150 W (6 ohms, 1 kHz, 0.7 % THD)

Surround............ 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)

Surround back ... 150 W + 150 W (6 ohms, 1 kHz, 0.7 % THD)

The AVR-1082 features an equal power 7-channel amplifier section,

with identical amplifier design on all 7 channels, with high current discrete

output devices on all channels. Each of the 7 amplifier channels is

rated at 150 watts, into 6 ohms.

■ Hefty Power Transformer for Stable Supply of Power

A huge power transformer has been connected in the power section

where it is combined with a rectifier diode and a large block capacitor

to ensure a large, stable supply of electrical current. Accordingly, the

AVR-1082 boasts high output power of 150 W for each of the 7 channels.

■ High Power Custom Transistor

When temperatures rise or fall inside the unit, bias current values supplied

to the power transistor tend to fluctuate, causing sound quality to deteriorate.

The high power custom transistor used in the AVR-1082 ensures that

the bias current is constantly uniform so that the sound you hear is of

consistently stable, high quality.

■ DDSC-Digital, for High-quality Sound Reproduction

Featuring the Analog Devices SHARC 32-bit floating point DSP processor,

DENON’s DDSC-D circuitry faithfully recreates all the nuances of the

original performance. Compared to ordinary 24-bit fixed point DSP

processors, the Analog Devices SHARC 32-bit floating point DSP processor

features greatly increased computational dynamic range for superior

reproduction of stereo and multi-channel digital program sources.

■ Featuring DTS-ES Discrete 6.1 Decoding

The AVR-1082 is equipped with the DTS-ES (true discrete) 6.1 decoder,

developed by DTS to provide dramatically improved surround sound

panoramic reproduction and superior surround sound localization.

■ Supports DTS-ES Matrix 6.1 Decoding

■ Supports DTS NEO:6 Surround Decoding

■ Featuring Dolby Pro Logic II Decoding

Enjoy 2-channel stereo recordings in stunning 5.1-channel surround playback.

The Dolby Pro Logic II decoder reproduces dynamic 5.1-channel surround

sound not only from normal 5.1-channel DVD but from 2-channel sources

such as videos and CDs, too. Dolby Pro Logic II uses matrix decoding

technology that has been dramatically improved over Pro Logic. With Pro

Logic II, for instance, the Surround (Rear) channels are in stereo (only

mono with Pro Logic) and playback covers the full frequency range (only

up to 7 kHz with Pro Logic). These improvements let you enjoy a wide

variety of 2-channel sources with the exciting effects of 5.1-channel surround

sound. In Dolby Pro Logic II, there is a Movie mode that creates a sound

space suitable for movies, a Music mode that does the same for music,

and a Pro Logic emulation feature that reproduces sound effects in the

way that conventional Pro Logic does.

■ Dolby Digital Decoding

■ 96 kHz, 24-bit Audio D/A Converters

L I N N E W M O D E ■ Adjustable Cross-Over Switching

The AVR-1082 supports subwoofer cross-over switching with a choice

of 3 cross-over frequencies: 80, 100, and 120. This lets you more

accurately match the performance characteristics of the subwoofer to

the main speaker system.

■ Wide-Range Play Capability for DVD-Audio or SACD

■ 8-Channel Input For DVD-Audio or SACD

■ Surround A/B Speaker Switching

■ Support for Multi Zone Configurations

The AVR-1082 provides a Multi Zone Output function and a Select

function that let you output different sources to multiple zones. Sources

can be selected for output to up to 1 additional zone, in addition to the

main room. Multi-room Zone can have variable pre-amp output.

The AVR-1082’s Power Amplifier Assign function lets you assign the 2

Surround Back (SB L/R) amplifier channels to instead drive the Multi-

room Zone powered speaker outputs, with 110 Watts per channel

power output capability, while still providing 5 full amplifier channels to

drive the main and surround speakers in the home theater room.

■ Personal Memory Plus

■ On Screen Display

■ Easy Operation with Programmable Remote Controller

• Dot Matrix LCD (10 characters)

Since the LC display on the remote controller is a dot matrix type, the

characters are easier to read, and up to 10 characters can be displayed

at any one time.

• System Call

System Call function to execute up to 29 successive pre-assigned

commands at the single touch of a button.

• Preset Memory (Over 100 Built-in Codes)

Since the remote controller is preprogrammed with more than 100

remote control codes, you can use the AVR-1082’s remote controller

to operate not only DENON equipment but components made by other

manufacturers as well. (Some components may not be supported by

Preset Memory.)

• Back light

■ Frequency Synthesis Tuning

• 40-station AM/FM Random Preset Memory Tuning

• Auto Preset Memory

■ Other Features

• Cinema Equalizer

• Music Surround Modes Including 7/5-Channel Stereo

• “S” and Composite Video Switching

• Component Video Switching (2 inputs, 1 output)

• Tone Control

F O R M A T I O N