




Focal HILOV3 Hi-Lo V3 High Low Adapter SIGNAL CONVERTER
with impedance simulation and remote output
Scope of delivery
1 x High Low Adapter
Installation instructions
STEREO AMPLIFIER SIGNAL CONVERTER
USE AN AMPLIFIER EASILY
To provide your amplifiers with an appropriate and high-quality audio signal while maintaining your original head units and associated OEM controls, you can choose the HILO.V3 converter.
HILO.V3 converts a stereo amplifier signal into two low-level line outputs, eliminating parasitics and creating separate grounds. You can now use an amplifier very easily and without any interference. It is now very easy to install a high quality HiFi system in your car. The selectable DC and AC voltage detection makes the HILO compatible with Allen head units from the original manufacturers.
Developed entirely by Focal, the HILO is available in Generation 3 with an impedance simulator that creates a speaker simulation network to avoid head unit muting.
The HiLo.V3 converts a high level signal into a low level signal and provides a remote output.
With its selectable AC or DC signal detection, the HiLo V3 is compatible with almost every OEM radio - including automatic start/stop.
The integrated Impeda
Focal High Low
HILO-V3
FOCAL high-low adapter with impedance simulation
To provide your amplifiers with a suitable and high-quality audio signal while maintaining your original head units and associated OEM controls, you can choose the HILO-V3 converter.
HILO-V3 converts a stereo amplified signal into two low-level line outputs, eliminating parasitic interference and creating separate grounds. You can now use an amplifier easily and without any interference. It is now very easy to create a high quality HiFi system in your car. The selectable detection of direct and alternating voltages makes the HILO compatible with Allen head units from the original manufacturer.
HILO-V3 was developed entirely by Focal and is available from generation 3 with an impedance simulator. This creates a speaker simulation network to avoid muting the head unit.
Features
Converts an amplified stereo signal into two low-level line outputs for a stereo amplifier.
Eliminates interference noise through separate grounds
Selectable DC and AC voltage detection - full compatibility with Allen OEM manufacturer head units.
Automatically generates a remote control signal to activate the associated amplifier
Can be used in passive mode without 12V power supply (in this case the remote control output will not work)
Technical data
Frequency response 10 Hz - 80 kHz (+/- 1dB)
Signal/noise ratio > 100dB
Distortion <0.01%
Automatic remote control output below 0.01%
Stop & Start compatible Automatic
DC detection threshold 5.2V for 14.4V input voltage
AC detection threshold 22mV 1kHz
