Buddha bead machine multifunctional miniature lathe sanding and polishing beads round beads mini diy woodworking lathe
This wood lathe can process up to 7cm diameter, 15cm length wood lathe. The base plate is made of 1560 aluminum profile, double guide rail design, trapezoidal screw, the tailstock comes with a pointed ejector pin by default (after upgrading the tailstock to a drill chuck version, the pointed ejector pin is changed to a plum blossom ejector pin). The tail top slider moves by hand throughout the whole process, high precision, no offset
Motor power 180 watts, mounted B12 drill chuck, concentricity within 0.1mm, with a plum blossom ejector pin. The speed controller supports speed regulation, and the range of speed regulation is 2000-6000 rpm. Lathe base plate 1560 aluminum profile, thickness 15mm, width 60mm. The support plate is made of 15cm length and 4cm width, which is generally stable and vibration-free.
The lathe tail top column can not be adjusted height, but the screw hole of the motor seat is 2mm larger than the screw, it is allowed to adjust the height after loosening the screw, and then tighten the screw after alignment.
motor is allowed to be adjusted up and down by about 2mm, please be aware of this. Left and right adjustment needless to say the motor seat is fixed to the bed through four screws, screw holes are also larger than the screws 2mm, support left, right, or center installation, must be aligned with the top of the tail before tightening the silk. Many buyers receive the goods, no matter what, first tighten the screws, and then dumbfounded!
