I design and print 3D items as a hobby and thought I'd start selling them on Ebay along with my other items... almost daily I find something I need or want that can be 3D printed... it takes some time to design the item using a CAD program... and then it can take many hours for the printer to complete a print job... although the parts turn out very nice, you have to keep in mind that 3D printed items can be a little "rough" compared to molded industrial made parts... every 3D printed part I have listed was designed by me from scratch... either because I needed one or someone I know needed one... some items were inspired from other designs on the internet, but for one reason or another I needed something slightly different... so I would design a whole new piece with the changes I wanted... all of my designs will have my logo (JRBII) on them somewhere... there isn't much money to be made when you factor in all the time and materials to do this, but it is an extremely fun and rewarding hobby... please look at the pics and see for yourself what you are buying... do not assume anything not listed or pictured... the 3D item you receive may not be the actual one pictured but will still look the same... if you have any doubts, then ask questions or don't buy... if you think there has been a mistake in my listing then let me know and we will resolve it... I just try to keep things simple and honest... feel free to ask any questions...

This listing is for ONE SINGLE Bose Speaker 3D Printed Wall Mount Bracket (NOT A PAIR)... It will fit Bose Speaker Models 101, 102, 121, 151, & Environmental... and probably a few more... Basically any of the old hard plastic indoor/outdoor housing speakers with the 1/4x20 threaded holes on the bottom of the case that are spaced ~60mm apart... I designed these brackets because I could not find anything anywhere for these older speakers... I have a variety of angles to choose from... Side to side pan can be straight or angled 15 degrees plus the front bolt hole is slotted 13 degrees to fine tune for the perfect pan angle... The straight pan brackets will be a matching set of 2 identical brackets...the 15 degree pan angled brackets will consist of a left and a right version... there are also 3 different downward tilt angles of 10, 25 & 40 degrees... THIS LISTING is for a a STRAIGHT brackets tilted downward 10 DEGREES... this is the "NORMAL" angle that should work in most applications... You can choose from 3 different PLA print colors- Black, White or Gray for each set... I'll ALSO include a set of two 1/4x20 bolts and washers that will work as well... I print these at 100% solid fill so they are very strong and durable... please ask if you have any questions, thanks... jerry

I'll be adding the other pan/tilt listings over the next week or two as soon as I get some printed and available...