
INTAKE SYSTEM CLEANING:
1. Pour the throttle detergent into the bottle.
2. Close the oil outlet valve of the cleaner, open its air inlet valve and connect the compressed air. Adjust the air pressure to about 70psi (5kgf/cm2), then close the intake valve.
3. Connect the spray nozzle to the cleaner oil outlet port. Remove the pipe in front of the throttle valve before flushing. Put the nozzle into the throttle body and start the engine. Then open the cleaner oil outlet valve and start flushing.
4. Keep the engine speed at 1000 rpm, accelerate once every 3~5 minutes, make the engine speed reach 2000~3000 rpm, and keep this state for 30 seconds. Then keep idling.
5. Turn off the engine after cleaning and reconnect the intake line.
FUEL SYSTEM CLEANING:
1. Pour gasoline detergent into steel bottle.
2. Close the valve of the cleaner oil outlet pipe, open its air inlet valve and connect the compressed air. Adjust the pressure regulator to a suitable pressure of 43-57psi (3-4kgf/cm2) by the air regulating valve.
3. Connect the cleaner quick connector to the fuel supply line of the vehicle's fuel system. Check all connections for leaks. There must be no leaks during cleaning work.
4. Start the engine and keep it idling, then flush the fuel system.
5. Drain out the pressure in the bottle after flushing, and then disconnect the cleaner.
6. Restore all of the pipes of the fuel system and check if there have leakage.
Packing list:
1pc* Fuel Injector Cleaner
1pc* Adapter Kits
1pc* Package Box
Top
About this item Product informationQuestions Reviews

We accept payment by any of the following methods:
PayPal
Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!

Customer satisfaction is very important to us.
If you have any problem with your order, please contact us and we will do our best to make you satisfied.

If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.