Description:
l Only supports 5V receivers, only supports 5V receivers, only supports 5V receivers.
l 1 channel servo signal input, control two electronic switches
l Maximum 10A current, all relay ports are led out
l One LED power indication working status + two relay status indicators
l Three-stage switch and proportional channel can be controlled
l With power-on protection function (the power-on remote control terminal does not move in the middle position), easy to operate
l Input channels do not need to be calibrated, compatible with various brands of remote control devices
l Adopt transparent heat-shrinkable rubber, stylish appearance and clear working status
l Small size and light weight
l Pin-type wiring is convenient and fast
Application range:
l Remote control model rocket launch
l Remote control model smoke control
l weapon system control like real machine
l Model aircraft's smoke control
l Control of various remote switch systems
Functional description:
l The remote switch remotely controls the electrical equipment on the aircraft model through a switch channel on the remote control, and the LED dynamically demonstrates the current switch state in real time, so that it can be quickly started without an operation manual.
l This device does not require calibration and can be accurately compatible with remote control devices of various brands.
Application:
1. Connect:
Plug the signal input cable into an idle receiver channel that corresponds to a switch on the remote.
The power indicator will be illuminated when connected to the receiver.
The work indicator lights up when the switch channel is open and vice versa.
2. Working mode:
The red LED light indicates the power indicator.
The blue LED indicates the relay's operating status.
3. Trigger:
(Take the throttle passage as an example) Turn the throttle lever on the remote control to the full throttle, and a relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the throttle lever on the remote control to the half throttle, and the two relays are not closed (that is, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the throttle lever on the remote control to the minimum throttle and the other relay to close (that is, the common and normally open terminals are connected, and the common and normally closed ends are disconnected). (Take the three-stage switch channel as an example) Turn the three-segment switch on the remote control to the high position, and one relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected). Turn the three-segment switch on the remote control to the neutral position, and the two relays will not operate (ie, the common terminal and the normally open terminal are disconnected, and the common terminal and the normally closed terminal are connected). Turn the three-stage switch on the remote control to the low position, and the other relay is closed (that is, the common terminal and the normally open terminal are connected, and the common terminal and the normally closed terminal are disconnected).
Package Included:
l 1 x Q1 RC relay switch
l 1 x self-sealing anti-static bag
Note:
l Please noted that this item only suitable for Q1, do not support FUTABA
