Description
X1002 PCIe to M.2 NVMe SSD Expansion Board + P580 Metal Case + H509 Passive Heatsink + PD27W US Plug
Product Description:
The X1002 is a PCIe M.2 NVMe SSD expansion board specially designed for the Raspberry Pi 5. It installs underneath the Raspberry Pi 5 and supports NVMe protocol M.2 SSDs, providing high-speed read/write performance, fast data transfer, and ultra-fast boot times.
The X1002 hardware does not limit the capacity of the NVMe SSD; the maximum capacity depends on the Raspberry Pi's operating system.
Attention:
If you encounter boot failure or the SSD is not recognized, please check the following:
1. Verify the power supply and ensure the spring contact of the X1002 aligns correctly with the Raspberry Pi 5 chip.
2. Check the wiring: the FFC cable has a specific orientation—confirm that the markings on the cable match the correct connection.
3. Update your firmware following the user manual instructions.
Incompatible with the following SSDs:
* WD Blue SN550/SN580 series
* WD Green SN350 series
* WD Black SN850 series
* Other NVMe SSDs using the same controller for Phison
* These specific models have proven compatibility issues. It is recommended to avoid using them when considering the X10xx series NVMe expansion boards.
Supports NVMe SSD Protocol:
* With a copper standoff and a screw for SSD installation
* Compatible with NVMe M.2 SSDs of any length: 2230/2242/2260/2280
Product Features:
* Compatible with other HAT expansion boards
* FFC cable length is only 30mm
* Supports installation of the official active heatsink as well as third-party heatsinks H501/503
* Equipped with ACT LED indicator. ON: power on/standby; Flashing: reading/writing
* Reserved space for installing a POE module
* Supports 2230/2242/2260/2280 NVMe M.2 SSDs
* Powered directly via FFC cable to the X1002 expansion board (provides up to 5W continuous power)
* X1002 hardware has no capacity limit for NVMe SSDs; actual capacity support depends on the Raspberry Pi operating system
Set 1 , with P580 Metal Case + H509 Passive Heatsink + PD27W US Plug Packing List:
Product Description:
The X1002 is a PCIe M.2 NVMe SSD expansion board specially designed for the Raspberry Pi 5. It installs underneath the Raspberry Pi 5 and supports NVMe protocol M.2 SSDs, providing high-speed read/write performance, fast data transfer, and ultra-fast boot times.
The X1002 hardware does not limit the capacity of the NVMe SSD; the maximum capacity depends on the Raspberry Pi's operating system.
Attention:
If you encounter boot failure or the SSD is not recognized, please check the following:
1. Verify the power supply and ensure the spring contact of the X1002 aligns correctly with the Raspberry Pi 5 chip.
2. Check the wiring: the FFC cable has a specific orientation—confirm that the markings on the cable match the correct connection.
3. Update your firmware following the user manual instructions.
Incompatible with the following SSDs:
* WD Blue SN550/SN580 series
* WD Green SN350 series
* WD Black SN850 series
* Other NVMe SSDs using the same controller for Phison
* These specific models have proven compatibility issues. It is recommended to avoid using them when considering the X10xx series NVMe expansion boards.
Supports NVMe SSD Protocol:
* With a copper standoff and a screw for SSD installation
* Compatible with NVMe M.2 SSDs of any length: 2230/2242/2260/2280
Product Features:
* Compatible with other HAT expansion boards
* FFC cable length is only 30mm
* Supports installation of the official active heatsink as well as third-party heatsinks H501/503
* Equipped with ACT LED indicator. ON: power on/standby; Flashing: reading/writing
* Reserved space for installing a POE module
* Supports 2230/2242/2260/2280 NVMe M.2 SSDs
* Powered directly via FFC cable to the X1002 expansion board (provides up to 5W continuous power)
* X1002 hardware has no capacity limit for NVMe SSDs; actual capacity support depends on the Raspberry Pi operating system
Set 1 , with P580 Metal Case + H509 Passive Heatsink + PD27W US Plug Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H509 Passive Heatsink
* 1 x Thermal Pad
* 2 x Screws for Heatsink
* 1 x PD27W Power Adapter (US Plug)
Set 2, with P580 Metal Case + H509 Passive Heatsink + PD27W EU Plug ,Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x H509 Passive Heatsink
* 1 x Thermal Pad
* 2 x Screws for Heatsink
* 1 x PD27W Power Adapter (EU Plug)
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x H509 Passive Heatsink
* 1 x Thermal Pad
* 2 x Screws for Heatsink
* 1 x PD27W Power Adapter (EU Plug)
Set 3, with P580 Metal Case + H505 Heatsink + PD27W (US Plug) Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H505 Heatsink
* 1 x PD27W Power Adapter (US Plug)
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H505 Heatsink
* 1 x PD27W Power Adapter (US Plug)
Set 4,with P580 Metal Case + H505 Heatsink + PD27W (EU Plug)Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H505 Heatsink
* 1 x PD27W Power Adapter (EU Plug)
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H505 Heatsink
* 1 x PD27W Power Adapter (EU Plug)
Set 5, P580 Metal Case + H500 Heatsink + PD27W (US Plug) Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H500 Heatsink
* 1 x PD27W Power Adapter (US Plug)
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H500 Heatsink
* 1 x PD27W Power Adapter (US Plug)
Set 6, with P580 Metal Case + H500 Heatsink + PD27W (EU Plug) Packing List:
* 1 x X1002 RPi5 NVMe Shield
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H500 Heatsink
* 1 x PD27W Power Adapter (EU Plug)
* 4 x M2.5x10mm Screws
* 4 x M2.5x5mm F/F Spacers
* 1 x SSD Copper Standoff
* 1 x M2x4mm Screw (to fix MVME M.2 SSD)
* 1 x PCIe FFC Cable
* 1 x P580 Metal Shell
* 4 x KM2.5x4mm Screws
* 4 x M2.5x6mm Spacers
* 4 x Rubber Pads
* 1 x H500 Heatsink
* 1 x PD27W Power Adapter (EU Plug)
Packaging Details:
* Weight: 0.16kg
Note:
* Raspberry Pi 5, M.2 NVMe SSD and SD card are not included.
* The following images are for reference only. The actual product appearance and number of accessories are subject to the items received. Thank you for your understanding!
User Manual:Please contact us for it,thanks
Firmware Update:Please contact us for it,thanks
Installation Video of X1002 & P580 Metal Case: Please contact us for it,thanks
Payment Terms
1. We accept PayPal,Payoneer,Visa Card,Google pay,Credit card etc.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
2. We ship to your eBay or Paypal address. Please make sure your eBay and Paypal address is correct before you pay.
Shipping Terms
1. We will process the order within the handling time ,if you have any questions, please contact us via eBay message or email.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
2. For remote regions of DHL/FedEx..., extra shipping costs might be charged. Usually it costs about 30USD-50USD. We will contact you if shipping company informed us your address belongs to remote area. Thanks for your understanding.
Return Terms
If you receive the item that not satisfied or defective, please do not open case and kindly notify us within 30 days. We will guide you the returning process for replacement or refund.
Custom Duties & Taxes
1. It is buyer's responsibility to cover the import duties, taxes.We do not charge any taxes and fees, and the possible taxes and fees will be collected by the platform or by third parties such as customs and carriers.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
2. Please check with your country's customs office and inform us what/how much should declare before shipping.
Feedback
1. Please kindly leave us a positive feedback and 5 star DSR if you satisfied with our product and service. Please feel free to contact us firstly if you have any problem with your order, we are responsible and credible seller and will solve the issue it for you asap.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
2. If you are dissatisfied for any reason, please don't be quick to leave us neutral or negative feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
On Jul 7, 2025 at 23:45:59 PDT, seller added the following information: