Tips: Please confirm whether your area can be used before purchasing ice blue headlights, because some areas have traffic regulations that do not allow the installation of ice blue headlights, such as California, Florida ...
 
 

Information:
a)Compatible List can not show up all Car model. Please check the Correct bulb size of your vechicle. it will work and fit.Thank you!
b)If you are unsure your bulb type, please do remember send message to tell us your car make, model, year and other information which is helpful to check bulb type.
For example:
For 2004 Ford F150, high/low beam
For 2015 RAM 1500 with projector-type, high beam
 
 

Plug Type: H7 single beam
Power: 200W/set (100W/bulb)
Quantity(each bulb): 2pcs 3570 CSP chips
Luminous Flux: 20000LM/set (10000LM/bulb)
Operating Voltage: DC 9-32V(fit 12V,24V vehicles)
Color Temperature: Pure Ice Blue 8000K
IP67 rated water and dust seal, 360 degree beam angle
Material: Aviation 6063 aluminum profile
Operating Temperature: -40-80 degree Celsius
Over 50000hrs lifetime
Usage: High Beam or Low Beam or fog light
 
 
 
Package Included :
2x H7 Light Bulbs
(New and old packaging will be shipped randomly)

headlight advantages:
💡 lamps are more energy and power than conventional halogen lamps.
The brightness is close to the xenon lamp, but the lights are illuminated without delay to enhance road safety.
Instantly start without strong current impact, improve battery life by more than 30%.
💡 Fast cooling , using the most advanced, heat-dissipating structural design.
Low warranty:
💡headlight has a simple structure, and the parts are less than the xenon lamp, which is lower than the xenon lamp failure rate!
💡headlight color temperature are balancing. Xenon bulbs are clear in the same color, about 8000K.
 


Install Caution
1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.
2. Put the vehicle into park or make sure it is securely in gear.
3. Be sure to turn off the ignition and remove the key.
4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.
5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.
6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.
7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.

DataCaciques