
Plaese Note:
Communication is the best way to solve problems. If you encounter any problems after purchase, please contact us promptly before returning or filing a case. Thanks!
8pcs Ignition Coils +8pcs Iridium Spark Plugs+8pcs Spark Plug Wires For Chevy Silverado GMC 4.8L 5.3L 6.0L UF262
Note: It is the around coils!
Specification
Condition: Brand New
Connector: 4 Pins
Thread Diameter: M14×1.25-17.5mm
Built to strict quality control standards.
Ready to use, Direct Replacement.
100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability
Silicone rubber boot withstands extreme heat to ensure superior insulation
Spark Plugs are using High-Performance Iridium metal, Much better than Nickel and Platinum
It's suggested that ignition coil and spark plug be replaced in a sychronized manner to lower the likelihood of common ignition system dysfunctions such as failure to start,engine vibration, misfiring, inadequate power, spark plug fouling and poor fuel economy
Package include:
8pcs Ignition Coils +8pcs Iridium Spark Plugs+8pcs Spark Plug Wires For Chevy Silverado GMC 4.8L 5.3L 6.0L UF262
Interchange Part Number:
Fitment:
Buick Rainier 2004 5.3L
Cadillac Escalade 2002-2005 5.3L
Cadillac Escalade 2002-2006 6.0L
Chevrolet Avalanche 1500 2002-2006 5.3L
Chevrolet Express 1500 2003-2007 5.3L
Chevrolet Express 2500 2003-2005 5.3L
Chevrolet Express 2500 2003-2007 4.8L
Chevrolet Express 2500 2003-2007 6.0L
Chevrolet Express 3500 2003-2007 5.3L
Chevrolet Express 3500 2003-2007 6.0L
Chevrolet Express 3500 2005-2007 4.8L
Chevrolet SSR 2003-2004 5.3L
Chevrolet Silverado 1500 1999-2007 4.8L
Chevrolet Silverado 1500 1999-2007 5.3L
Chevrolet Silverado 1500 2003-2007 6.0L
Chevrolet Silverado 1500 2009-2011 4.3L
Chevrolet Silverado 1500 HD 2001-2007 6.0L
Chevrolet Silverado 2500 1999-2004 6.0L
Chevrolet Silverado 2500 1999-2006 5.3L
Chevrolet Silverado 2500 HD 2001-2006 6.0L
Chevrolet Silverado 3500 2001-2006 6.0L
Chevrolet Silverado 3500 2004-2006 5.3L
Chevrolet Suburban 1500 2000-2006 5.3L
Chevrolet Suburban 1500 2006 6.0L
Chevrolet Suburban 2500 2000-2006 6.0L
Chevrolet Tahoe 2000-2006 4.8L
Chevrolet Tahoe 2000-2006 5.3L
GMC Savana 1500 2003-2007 5.3L
GMC Savana 2500 2003-2005 5.3L
GMC Savana 2500 2003-2007 4.8L
GMC Savana 2500 2003-2007 6.0L
GMC Savana 3500 2003-2007 6.0L
GMC Savana 3500 2004-2007 4.8L
GMC Sierra 1500 1999-2007 4.8L
GMC Sierra 1500 1999-2007 5.3L
GMC Sierra 1500 2002-2007 6L
GMC Sierra 1500 HD 2001-2007 6.0L
GMC Sierra 2500 1999-2000 5.3L
GMC Sierra 2500 1999-2004 6.0L
GMC Sierra 2500 HD 2001-2007 6.0L
GMC Sierra 2500 HD 2006 8.1L
GMC Sierra 3500 2001-2007 6.0L
GMC Sierra C3 2001 6.0L
GMC Yukon 2000-2006 4.8L
GMC Yukon 2000-2006 5.3L
GMC Yukon 2001-2006 6.0L
GMC Yukon XL 1500 2000-2006 5.3L
GMC Yukon XL 1500 2001-2006 6.0L
GMC Yukon XL 2500 2000-2006 6.0L
Hummer H2 2003-2006 6.0L
Isuzu Ascender 2003-2004 5.3L
How to Change Ignition Coils and Spark Plugs?
This product recommends professional installation.
1. Disconnect the old ignition coil and spark plugs
2. Disconnect your battery’s negative terminal
3. Locate the ignition coil and spark plugs to be replaced.
4. Release the clip on the plug running into the side of coil.
5. Use a wrench to unscrew the bolts holding the original coil in place
6. Extract original ignition coil and spark plugs from the engine bay
7. Swapping in the new ignition coil and spark plugs
8. Prior to installation, compare the new coil to the old one
9. Orient the new coil in the same direction
10. Insert the bolts to hold the coil in place
11. Activate the New ignition coil and spark plugs
12. Connect the plug into the side coil
13. Plug in ignition cables according to the order written on them.
14. Reconnect the battery
15. Start the vehicle to test the new ignition coil and spark plugs
Note:
1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.