The raincoat (raincoat) poncho anti-thermal imager is made taking into account the modern needs of our military. The front and back part of the raincoat is made of raincoat fabric in the middle sewn special laminated (aluminum fabric) reinforced with reinforcement. The inner side is a breathable membrane, for greater comfort. The size of the poncho with a hood in the unfolded form is 150*300 cm, the length of the raincoat is 150 cm. There are special hand holes on the sides and in the middle for convenience. The side openings are fixed with velcro. Advantages: • Raincoat as protection from thermal imaging, it is not penetrated by thermal imaging from a working distance (testing was carried out with a thermal imaging scope • Ideal for masking from thermal imaging at a distance of 100 meters (in winter at lower temperatures it will work from a distance of 30 meters, but in summer it is better not to use it closer than 100 meters.) • Loosely fits the body, so it does not heat up quickly on a warm night (this is achieved due to sewing in three loosely connected layers, the construction of the poncho itself also works, ensuring the movement of air). against rain, does not let in wind and moisture • Tear-resistant thanks to the reinforcement of the laminated layer, unlike ordinary foil, which is damaged under almost any load • Takes up little space when folded, comes with a cover for storage and transportation.