| Toyota: 4785006110 | Lexus: 4785033250 | PIC: PICBC2221 | Cardone Remanufactured: 19-B6992 |
- 1 Year Warranty
- Same Day Handling
- Free Returns
OEG Parts New Rear Left Brake Caliper Compatible With Toyota Camry 2.5L 3.5L 2012-2017, Avalon 2.5L 3.5L 13-18 2013 2014 2015 2016 2017 2018 PICBC2221 19B6992 19-B6992 4785006110 4785033250
Specifications
| OE Manufacturer: | |
| Product Type: | Brake Caliper |
| Weight: | 4.4000 |
| Condition: | NEW |
| Unit Source: | |
| Design / Type: | |
| Design / Type: | |
| Design / Type: | |
| Starter Series: | |
| Location - General: | Rear |
| Location - Specific: | Rear Left |
| Design Type: | |
| Voltage: | |
| Amperage: | |
| kW: | |
| Rotation: | |
| Regulator/Fan: | |
| Tooth Count: | |
| Spline Count: | |
| Polarity: | |
| Shaft Type: | |
| Duty Cycle: | |
| Horsepower: | |
| RPM: | |
| V-Set: | |
| Circuit Type: | |
| Plug Code: | |
| Plug Orientation: | |
| Pulley Class: | |
| Case OD (mm): | |
| Overall Length (mm): | |
| Gear OD (mm): | |
| Pulley Belt Width (mm): | |
| Pulley OD (mm): | |
| Shaft Overall Length (mm): | |
| Shaft OD (mm): | |
| Clutch Type: | |
| Operating Mode: | |
| Pads Included: | No |
| Connection Type: | |
| Piston Material: | Steel |
| Number of Pistons: | 1 |
| Piston Outside Diameter (in): | 1.496 |
| Piston Outside Diameter (mm): | 37.9984 |
| Bleeder Port Measurement: | M7 x 1.0 |
| Inlet Port Measurement: | 0.39 |
| Ignition Type: | |
| Housing Material: | |
| Torque (ft. lbs): | |
| Pulley OD (in): | |
| Crankshaft OD (in): | |
| Terminal Type: | |
| Sensor Included: | |
| Idle ACM Included: | |
| Cage Wheel Included: | |
| Wiring Harness Included: | |
| Number of Pistons: | 1 |
| Caliper Pistion OD (mm): | 37.9984 |
| Motor Overall Length (in): | |
| Motor OD (in): | |
| Wheel OD (in): | |
| Bearing Inside Diameter (mm): | |
| Bearing Outside Diameter (mm): | |
| Bearing Width (mm): | |
| Rotor Inside Diameter (mm): | |
| Rotor Outside Diameter (mm): | |
| Rotor Overall Length (mm): | |
| Rotor Shaft Outside Diameter (mm): | |
| Rotor Shaft Overall Length (mm): | |
| Mounting Hardware Included: | No |
| Installation Hardware Included: | Yes |
| Mounting Type: | |
| Mounting Type: | |
| Mounting Type: | |
| Cap Design: | |
| Plunger Type: | |
| Includes: | |
| Includes: | |
| Number of Mounting Holes: | |
| Number of Terminals: | |
| Number of Wires: | |
| ETB Inside Diameter (in): | |
| Terminal Type: | |
| Hose Inside Diameter: | |
| Minimum Flow Rate: | |
| Minimum Pressure: | |
| Unit Finish: | Zinc-Coated |
| Unit Color: | Silver |
| Number of Pieces: | |
| Country of Origin: | CN |
| Country of Use: | |
| Notes: | |
| Other Part #: | PICBC2221 19B6992 |
Customer Service Available 7 Days A Week
Lexus ES300h 2013-2018 L4 2.5L 2494cc 152cid Rear Left; Base
Lexus ES350 2013-2018 V6 3.5L 3456cc Rear Left; Base
Toyota Avalon 2013-2018 L4 2.5L 2494cc 152cid Rear Left; Hybrid Limited
Toyota Avalon 2016-2018 L4 2.5L 2494cc 152cid Rear Left; Hybrid XLE Plus
Toyota Avalon 2015-2018 L4 2.5L 2494cc 152cid Rear Left; Hybrid XLE Premium
Toyota Avalon 2015-2015 L4 2.5L 2494cc 152cid Rear Left; Hybrid XLE Touring
Toyota Avalon 2013-2014 L4 2.5L 2494cc 152cid Rear Left; Hybrid XLE
Toyota Avalon 2013-2018 V6 3.5L 3456cc Rear Left; Limited
Toyota Avalon 2016-2018 V6 3.5L 3456cc Rear Left; Touring
Toyota Avalon 2016-2018 V6 3.5L 3456cc Rear Left; XLE Plus
Toyota Avalon 2013-2018 V6 3.5L 3456cc Rear Left; XLE Premium
Toyota Avalon 2015-2015 V6 3.5L 3456cc Rear Left; XLE Touring SE
Toyota Avalon 2013-2015 V6 3.5L 3456cc Rear Left; XLE Touring
Toyota Avalon 2013-2018 V6 3.5L 3456cc Rear Left; XLE
Toyota Camry 2012-2017 L4 2.5L 2494cc 152cid Rear Left; Hybrid LE
Toyota Camry 2014-2017 L4 2.5L 2494cc 152cid Rear Left; Hybrid SE
Toyota Camry 2012-2017 L4 2.5L 2494cc 152cid Rear Left; Hybrid XLE
Toyota Camry 2012-2014 L4 2.5L 2494cc 152cid Rear Left; L
Toyota Camry 2012-2017 L4 2.5L 2494cc 152cid Rear Left; LE
Toyota Camry 2014-2014 L4 2.5L 2494cc 152cid Rear Left; SE Sport
Toyota Camry 2012-2017 L4 2.5L 2494cc 152cid Rear Left; SE
Toyota Camry 2016-2016 L4 2.5L 2494cc 152cid Rear Left; Special Edition
Toyota Camry 2012-2017 L4 2.5L 2494cc 152cid Rear Left; XLE
Toyota Camry 2015-2017 L4 2.5L 2494cc 152cid Rear Left; XSE
Toyota Camry 2012-2014 V6 3.5L 3456cc Rear Left; SE
Toyota Camry 2012-2017 V6 3.5L 3456cc Rear Left; XLE
Toyota Camry 2015-2017 V6 3.5L 3456cc Rear Left; XSE
*NOTE: "M.T" Indicates Manual Transmission / "A.T" Indicates Automatic Transmission*
Please Reach Out To Customer Service To Confirm Fitment, If Necessary.
WE STRIVE TO PROVIDE A 5 STAR EXPERIENCE!
Our objective is 100% customer satisfaction. If we did not fulfill your expectations please contact us using eBay messager.
All of our products are covered by a one year warranty from the date of purchase.
We offer warranty for products that have a manufacturing defect due to materials or workmanship. The warranty does not cover failure due to abuse, misuse, improper installation or modifications. We are not liable for the cost of installation, removal or any other expenses beyond the original purchase price of the item.
It is the responsibility of the customer to verify the correct application information prior to purchasing any product from our eBay store. All purchases made in error may be returned within 30 days from the date of purchase and are subject to a 20% restocking fee. The product must be returned in its original condition including the packaging.
Free shipping on purchases shipped to all 50 states.
We offer international shipping through eBay global shipping program.
We process and ship orders within one business day of the order information being received. With the exemption of U. S. holidays.
Expedited orders including next day, second day and third day delivery methods are processed and shipped the same business day if checkout is completed by 5pm Eastern Time.
We reserve the right to change shipping carrier and shipping method for efficient and on-time deliveries. OEG Parts is not responsible for carrier delays such as weather or natural disasters.
All returns must be approved with a Return Material Authorization Number (RMA #) that must be included with the return
To receive an RMA Please contact OEG Parts Customer Service.
All returned products will be inspected. Returns processing may take up to 3 business days from the time your product is received at our return facility locations.
Immediate payment is required during checkout. We will process and ship orders once checkout is completed.
Often, Customers reach out to us to help confirm fitment of parts prior to purchase.
We always recommend cross referencing a part number to ensure fitment as well.
You may Contact Us by locating the "Contact Seller" Button within a listing.
After making a purchase, the phone number will be visible to you through eBay when you click on "Contact Seller".
You can also find our phone number by clicking on FAQs > Other
It is against eBay Policy to provide you our contact information any other way.
Copyright © 2023
OEG Parts. All Rights Reserved.
eBay Template Design by OCDesignsOnline
categories