
Plaese Note:
Communication is the best way to solve problems. If you encounter any problems after purchase, please contact us promptly before returning or filing a case. Thanks!
6pcs ignition coils+ 6pcs Iridium Spark Plugs for 2000-2002 Honda Passport UF252+7090
Feature:
Connector: 3 Pins
Connector Gender: Female
Terminal Gender: Male
Terminal Type: Blade
Voltage: 12V
Thread Diameter: M14
Thread Length: 19mm
Specifications
Brand New Ignition Coil
Built to strict quality control standards.
Ready to use, Direct Replacement.
100% Compatible with OEM Parts, meets Original Equipment Manufacturer (OEM) Standards
100% pure copper windings in bobbins improve durability ,thermoplastic housing withstands heat stress for enhanced durability
Silicone rubber boot withstands extreme heat to ensure superior insulation
Warranty: 1 Year
Package including: 6pcs Ignition Coil + 6pcs Iridium Spark Plug
If you have any questions, please contact us first and we will solve it for you. Thank you for your kindness!
NOTE:
Ignition Coil:
UF252
Spark Plugs: 7090
Fit For
2000-2002 Honda Passport
How to Change Ignition Coils and Spark Plugs?
This product recommends professional installation.
1. Disconnect the old ignition coil and spark plugs
2. Disconnect your battery’s negative terminal
3. Locate the ignition coil and spark plugs to be replaced.
4. Release the clip on the plug running into the side of coil.
5. Use a wrench to unscrew the bolts holding the original coil in place
6. Extract original ignition coil and spark plugs from the engine bay
7. Swapping in the new ignition coil and spark plugs
8. Prior to installation, compare the new coil to the old one
9. Orient the new coil in the same direction
10. Insert the bolts to hold the coil in place
11. Activate the New ignition coil and spark plugs
12. Connect the plug into the side coil
13. Plug in ignition cables according to the order written on them.
14. Reconnect the battery
15. Start the vehicle to test the new ignition coil and spark plugs
Note:
1. In preparation for the replacement, the vehicle should be turned off and cooled for a certain period of time before starting the replacement.
2. Pay attention to the cleanliness of the entire operation, must wipe the ignition coil around the dust and oil, if into the combustion chamber, will have serious adverse effects, try to wear gloves to operate.