Pneumatic punching machine small desktop pneumatic press cylinder pneumatic riveting machine hot press double column pneumatic punching machine
Single column:200kg pressure
Working table area:135*150mm
Cylinder specification:63*75-50mm
Punch bore:$16mm
Working height:180mm
Throat depth:110mm
Inlet pipe:8mm
Operating pressure:0.4-0.8Mpa
I. Product Features.
1, compressed air as a power source, high efficiency and easy to operate, can reduce the labor force, can be applied to manual operation, automatic
It can be applied to manual operation, automatic operation and integrated operation of assembly line.
2、Simple structure, easy to operate, inexpensive, superior performance, no hydraulic system and electric standby noise, can save power consumption to reduce production costs, has a good performance.
No noise generated by the hydraulic system and electric standby, can save power consumption to reduce production costs, has a high cost-effective; 3, the output is easy to adjust, only the power of the machine is adjusted.
3、The output force is easy to adjust, only need to adjust the air pressure can be adjusted to the required pressure, high yield. Equipped with anti-rotation guide
With anti-rotation guide bar and guide plate, high precision, can adapt to high-speed precision punching.
4、According to different products or molds, it can adjust the height, speed, stroke, pressure and stamping time.
5、Can choose two-hand control button or foot switch, can increase the protection device, heating mold, temperature control and pressure sensor, manipulation device and pre-control device.
The maneuvering device and pre-control device meet the safety standard to ensure the personal safety of the operator.
6、Using microcomputer control system, you can choose manual, semi-automatic or full-automatic operation, and you can increase the control device.
Scope of application
Suitable for electronics, electrical appliances, instruments, meters, cameras, clocks and watches, jewelry, small hardware and clothing, shoes and hats.
Material to be processed
Shearing, punching, dropping, molding, bending, riveting and other processes can be carried out on thin plates, strips and coils; it is suitable for the processing of non-ferrous metals and plastic parts.
It is suitable for the processing of non-ferrous metals and plastic parts.
Microcomputer control system instructions
1. Turn on the power supply, the controller has been adjusted at the factory time, the number of segments 1 time for the lower pressure delay time and other segments of time and for the
Response time
2. If you need to set the control time press the “Edit” key for more than 2.5 seconds, after hearing the sound of “Tick”, the number of segments 1 in the blinking, the use of the
“△(+)” or ‘▽(-)’ key to adjust the downward pressure delay time, continue to press the ‘Edit’ key, respectively (set 2,3,4) the number of segments, if the other segments have not been edited, then press the ‘Edit’ key for more than 2.5 seconds.
If the other segments are not edited, the number of segments is still flashing, then press the manipulation switch machine does not work until the return to the paragraph 1, at this time
At this time, press the switch to operate the machine. Press the “Function Selection” key, manual, semi-automatic, full-automatic or debugging indicator light will light up in turn, which means the machine is working.
The indicator lights of manual, semi-automatic, full automatic or debugging will light up in sequence, which represents the working status of the machine. When selecting manual, you can set the reply time to 0, and press the switch to work once.
time, choose semi-automatic or full-automatic must have the reply time, otherwise the cylinder downward pressure will not reply, choose semi-automatic work
When choosing semi-automatic work, press the maneuvering switch and the machine will work automatically, release the switch and the machine will stop working, when choosing full-automatic work, press the maneuvering switch and the machine will work automatically.
Full-automatic work, press the “emergency stop” key machine stops working, debugging is not affected, press the maneuvering switch machine down, release the switch machine stops working, press the maneuvering switch machine down, release the switch machine stops working.
Press the switch to return the punch to its position.
3. Press the “Emergency Stop” key to stop the machine when it is working automatically. Press and hold down the “counting zero” key for more than 2.5 seconds, the counter will be cleared to zero.
The counter will be cleared to zero. At the end of the work, long press the power button for more than 2.5 seconds to turn off the power and disconnect the power supply.
Working table area:135*150mm
Cylinder specification:63*75-50mm
Punch bore:$16mm
Working height:180mm
Throat depth:110mm
Inlet pipe:8mm
Operating pressure:0.4-0.8Mpa
I. Product Features.
1, compressed air as a power source, high efficiency and easy to operate, can reduce the labor force, can be applied to manual operation, automatic
It can be applied to manual operation, automatic operation and integrated operation of assembly line.
2、Simple structure, easy to operate, inexpensive, superior performance, no hydraulic system and electric standby noise, can save power consumption to reduce production costs, has a good performance.
No noise generated by the hydraulic system and electric standby, can save power consumption to reduce production costs, has a high cost-effective; 3, the output is easy to adjust, only the power of the machine is adjusted.
3、The output force is easy to adjust, only need to adjust the air pressure can be adjusted to the required pressure, high yield. Equipped with anti-rotation guide
With anti-rotation guide bar and guide plate, high precision, can adapt to high-speed precision punching.
4、According to different products or molds, it can adjust the height, speed, stroke, pressure and stamping time.
5、Can choose two-hand control button or foot switch, can increase the protection device, heating mold, temperature control and pressure sensor, manipulation device and pre-control device.
The maneuvering device and pre-control device meet the safety standard to ensure the personal safety of the operator.
6、Using microcomputer control system, you can choose manual, semi-automatic or full-automatic operation, and you can increase the control device.
Scope of application
Suitable for electronics, electrical appliances, instruments, meters, cameras, clocks and watches, jewelry, small hardware and clothing, shoes and hats.
Material to be processed
Shearing, punching, dropping, molding, bending, riveting and other processes can be carried out on thin plates, strips and coils; it is suitable for the processing of non-ferrous metals and plastic parts.
It is suitable for the processing of non-ferrous metals and plastic parts.
Microcomputer control system instructions
1. Turn on the power supply, the controller has been adjusted at the factory time, the number of segments 1 time for the lower pressure delay time and other segments of time and for the
Response time
2. If you need to set the control time press the “Edit” key for more than 2.5 seconds, after hearing the sound of “Tick”, the number of segments 1 in the blinking, the use of the
“△(+)” or ‘▽(-)’ key to adjust the downward pressure delay time, continue to press the ‘Edit’ key, respectively (set 2,3,4) the number of segments, if the other segments have not been edited, then press the ‘Edit’ key for more than 2.5 seconds.
If the other segments are not edited, the number of segments is still flashing, then press the manipulation switch machine does not work until the return to the paragraph 1, at this time
At this time, press the switch to operate the machine. Press the “Function Selection” key, manual, semi-automatic, full-automatic or debugging indicator light will light up in turn, which means the machine is working.
The indicator lights of manual, semi-automatic, full automatic or debugging will light up in sequence, which represents the working status of the machine. When selecting manual, you can set the reply time to 0, and press the switch to work once.
time, choose semi-automatic or full-automatic must have the reply time, otherwise the cylinder downward pressure will not reply, choose semi-automatic work
When choosing semi-automatic work, press the maneuvering switch and the machine will work automatically, release the switch and the machine will stop working, when choosing full-automatic work, press the maneuvering switch and the machine will work automatically.
Full-automatic work, press the “emergency stop” key machine stops working, debugging is not affected, press the maneuvering switch machine down, release the switch machine stops working, press the maneuvering switch machine down, release the switch machine stops working.
Press the switch to return the punch to its position.
3. Press the “Emergency Stop” key to stop the machine when it is working automatically. Press and hold down the “counting zero” key for more than 2.5 seconds, the counter will be cleared to zero.
The counter will be cleared to zero. At the end of the work, long press the power button for more than 2.5 seconds to turn off the power and disconnect the power supply.