Need
to pair your remote? Point the remote at your TV Box and press the
voice button to get started. Refer to the instructions below if you
don't see anything on-screen.
Pair the XR15 Remote to Control an Xfinity X1 TV Box:
Make
sure the remote batteries (AA) are installed and your TV and Xfinity X1
TV Box are powered on. Also, set the TV input to correspond with your
Xfinity X1 TV Box.
- 1- Press and hold the Xfinity and Info(i) buttons together for five seconds. Wait for the remote light to change from red to green.
- 2- Follow the instructions by entering the three-digit, on-screen pairing code.
- 3- Once your remote is paired, follow the on-screen instructions to set up power, volume and input control for your TV.
Pair the XR15 Remote to Control a TV:
This will allow you to control your television's power, volume and input from the XR15 remote.
1- While the TV is on, press and hold the Xfinity and Mute buttons together for five seconds until the remote light at the top changes from red to green.
2- Enter the first five-digit code listed for the TV manufacturer.
Most likely code:
Valid code = remote light blinks green twice
Invalid code = remote light blinks red, then green.
3- Aim the remote at the TV, and press the Power button. If the TV turns off, turn the TV back on and verify that the Volume and Mute buttons work.
If the TVdoes not turn off, repeat the process with the next TV manufacturer device code.
If you are still having issues, perform a factory reset:
- 1- Simultaneously press and hold the A button [triangle] and the D button [diamond] until the status light on the remote changes from red to green. This takes about 5 seconds.
- 2- Press 9-8-1 on your remote to complete the factory reset. Once this is complete you can retry pairing your XR15 remote.