Clean Injection Performance 540cc Fuel injectors with CIP 340lph fuel pump for the 90-97 Mazda Miata 

 

Looking for bigger injectors and fuel pump for your boosted Mazda? Listing is for a complete set of 4pcs Clean Injection Performance 540cc Fuel Injectors and Clean Injection Performance 340lph e85 fuel pump for 1989-2005 Mazda Miata engine. Injectors will fit the factory or aftermarket fuel rail and will plug right into the factory injector harness. The fuel pump is a direct swap and comes all accessories for a easy installation. 

Clean Injection Performance injectors retains a consistent linear flow from 3 bar to 7 bar fuel pressure. Very tuner friendly with fuel trimming down to 1.0ms. The injectors utilize 4 hole 30 degree mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Injectors are dynamically and statically flow matched on the industry leading ASNU Classic test equipment. They are then sealed and packed in balanced sets within 1 percent.  Injectors will come with flow sheet with injector data including injector latency/dead time data for tuning. 

INJECTOR FEATURES:

  • Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
  • Full Injector Latency Data Provided
  • Tunable to factory Rock solid Idle
  • Excellent Fuel Atomization
  • Direct Plug and Play Fit
  • Fast Response time
  • Consistent performance all the way to 100psi+ Fuel Pressures
  • 2 Year Unlimited Mile Warranty

 Clean Injection Performance 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels. Clean Injection Performance 340lph pumps are tested to work with ethanol fuels up to E100, methanol fuels up to M100, and all types of gasoline. The Clean Injection Performance 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high-performance naturally aspirated and forced induction vehicles. Excellent for EFI or carburetor setups.  It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.

 

Features:

 

  • Integrated check valve. Designed to retain fuel pressure when the pump is off. 
  • Black-Coated steel for enhanced corrosion resistance
  • Carbon brushes make it ideal for ethanol and methanol applications.
  • OEM technology designed and developed for E85. All pumping components have been validated to OEM Specifications for approved use in E85/Flex fuel applications.
  • Integrated over-pressure safety bypass valve
  • Quite, and reliable performance.
  • The average flow is 340LPH at 40PSI fuel pressure
  • PRV Activation: 80 PSI
  • Min Voltage Input: 6 volts
  • Max Voltage Input: 18 volts
  • Current Draw (40 psi): 12 amps (13.5v)
  • Current Draw (80 psi): 15 amps (13.5v) Fuse: 20 amps (13.5v)
  • EFI or carbureted applications (carbureted applications will require a bypass style regulator)
  • Fuel Pump Kit includes fuel pump, rubber sleeve, e85 compatible rubber hose, hose clamps, end cap, 2 pre-filters, and flying lead
  • 2-Year Unlimited Mile Warranty


FITMENT GUIDE:

- 89-99 Miata 1.6L (B6ZE) & 1.8L (BP)

- 00-05 Miata NB 1.6L (B6ZE) 1.8L (BP-5A, BP-4W, BP-Z3)

 

 Injector specs:

Static Flow Rate (GAS): 540cc at 3bar MIN.

Spray Pattern: Cone

Coil Impedance: 12.4 ohm 

Injector Connector Type: Nippon Denso