1. Tool kit, large capacity, durable, thickened and waterproof, weighing approximately 0.16kg, size 24x10x18cm
2. Fiber optic power meter (excluding battery), test range -70~+10dBm (-50~26dbm), test error: ± 0.2dB (manual calibration allowed), intelligent shutdown, can be viewed at any time, suitable for interface FC/ST/LC (LC interface purchased by oneself), while holding down the power button and pressing the wavelength button for 2 seconds. After startup, enter the calibration function interface. REF key: increase by 0.1dB, dB key: decrease by 0.1dB
3. Fiber optic cutter, the selected material meets the requirements for cold connection. The service life of the blade can reach 32000 times. The diameter type of the optical fiber is 125 microns, with a cutting length of 9-16mm/10-16mm. The three in one fixture is suitable for 0.25mm bare fiber, 0.9mm tail fiber, 2.5-3mm leather fiber, and is suitable for 0.25-0.9mm fiber types. It is suitable for operation (storage) at temperatures of -40~80 degrees Celsius, weighs approximately 273g, and has a size of 65x58x61mm
4. Three port fiber stripper, easy to peel, no damage to the fiber. The large hole is used for peeling 2mm~3mm, the middle hole of the outer protective layer of the fiber is used for peeling 900-250 microns, and the fiber core is peeled off with a white soft rubber protective layer with a coating size of 250-125 microns
5. The wire stripper is lightweight, small in size, and easy to operate. It can peel off single/dual cores indoors and outdoors. It is customized for wire stripping to ensure that the fiber optic is not damaged.
6. The length fixed bracket is used to improve work efficiency and is suitable for cold joints of different specifications. It is an indispensable tool for making cold joints
Packaging includes:
- 1x Toolkit
- 1 optical power meter (excluding batteries)
- 1x visual fault locator (excluding batteries)
- 1x fiber optic cutter
- 1x Three Port Stripper
- 1x leather stripper
- 1x aramid scissors
- 1x length bracket
- 1 alcohol bottle