■Uses

Stretch creases and folds in documents such as newspapers and catalogs

To open the binding of thick books as much as possible

To press down the bulge of a spread book and flatten the paper surface as much as possible.

Presses down warped photographs and other materials to make them flat.

Features

High-performance anti-reflective film is used.

A special film with high light transmittance is attached to the acrylic board to reduce the intrusion and reflection of external light.

Anti-static material is used.

Equipped with an aluminum handle for easy pressing.

How to use

Place the scanner on the book or newspaper to be scanned and press lightly with the left and right handles. For thicker books, it is recommended that the acrylic sheet adheres to the book so that it follows the shape of the book for more beautiful scanning. When the acrylic sheet is adhered to the book, the difference between the thick part and the thin part should be within 30mm.

Before using the book presser

The book presser is covered with a protective film to protect the surface. Please remove the protective film before use.

Caution

This is a resin product. Please handle with care.

When not in use, place the product in the package or on a flat desk.

Do not store in direct sunlight or in a room with a temperature above 50°C (122°F).

4. If the product gets dirty, wipe with a soft cloth moistened with a solution of neutral detergent diluted 100 times or more.

5. Check the position of fluorescent and other lights and outside light, and use the product in a place and direction with as little reflection as possible.